The 2014 Mazda CX-5 uses SAE 0W-20 synthetic motor oil (typically Mazda Genuine or an equivalent that meets API SN or newer). The engine oil capacity is about 4.5 quarts, including the filter.
Oil type and viscosity
The CX-5’s SKYACTIV-G engines are designed for low-viscosity 0W-20 oil. Mazda generally recommends a full-synthetic 0W-20 that meets API SN or a newer standard. This helps optimize fuel economy and provide adequate engine protection across temperature ranges. For peace of mind, always consult the owner's manual or your local Mazda dealer if you’re unsure.
Key specifications to guide your choice are listed below.
- Viscosity: SAE 0W-20
- Oil type: Full synthetic (Mazda Genuine oil or an equivalent that meets Mazda specs)
- Certifications: API SN or newer; ILSAC GF-5 (or GF-6) compatibility as applicable
- Capacity: Approximately 4.5 quarts (with filter replacement)
Before selecting oil, check these essential criteria to ensure compatibility with the CX-5’s engine.
Using the recommended oil helps maintain engine efficiency, temperature stability, and longevity. If you’re switching brands, confirm that the oil meets Mazda’s specifications for the 2014 CX-5.
Maintenance basics
With the correct oil specification, routine maintenance is straightforward. The typical oil-change cadence for many CX-5 owners is every 7,500 miles (12,000 km) under normal driving conditions, though severe driving conditions may require more frequent changes. Always refer to the vehicle’s manual for the exact schedule and any model-year caveats.
Summary
In short, a 2014 Mazda CX-5 takes a 0W-20 synthetic motor oil, about 4.5 quarts with a new filter. Choose a high-quality full synthetic that meets API SN or newer and Mazda specifications, and follow the maintenance interval in your owner’s manual to keep the engine running smoothly.