To reset the TPMS light on a Honda, inflate all tires to the recommended cold pressures and then perform a relearn using either the dedicated TPMS reset button or the vehicle’s settings menu, followed by a drive to complete the process. The exact steps depend on your model and year.
Understanding how Honda TPMS works helps in this process: the system monitors tire pressure with sensors in each wheel. After correcting pressure or changing tires, you may need to recalibrate or relearn the sensors so the light turns off and the system reports accurate readings. Some Hondas relearn automatically after you drive with proper pressures; others require a manual reset.
Manual reset using the TPMS button
Some Honda models still use a dedicated TPMS reset button to relearn the sensors. Use these general steps, noting that exact button location and blink patterns can vary by year and trim.
- Inflate all tires to the recommended cold pressure, shown on the door jamb placard or in the owner’s manual.
- Turn the ignition to the ON position, but do not start the engine.
- Locate the TPMS reset button. It is commonly labeled “TPMS” or shown with a tire-pressure icon and may be under the steering column, in the glove box, or in the trunk.
- Press and hold the button for about 3–5 seconds until the TPMS indicator on the dash blinks or goes out (the exact blink pattern can differ by model).
- Start the engine and drive on a highway at steady speeds (typically 30–50 mph) for 10–20 minutes to complete the relearn.
If the light remains on after this procedure, recheck pressures and inspect tires for leaks or damaged sensors. Some older Hondas complete the relearn automatically after driving with proper pressure.
Calibrating via the vehicle’s information display or infotainment menu
Newer Honda models often rely on the in-dash information display or the center touchscreen for TPMS calibration. Follow these general steps, recognizing that exact path names may vary by model/year.
- Inflate all tires to the recommended cold pressure.
- Turn the ignition to ON (engine off) and access the information display using steering wheel controls or the center screen.
- Navigate to Settings or Vehicle > TPMS (Tire Pressure Monitor) > TPMS Calibration or Reset.
- Select Calibrate or Reset and confirm. The display may show a message like “Calibrating.”
- Drive normally on level roads at highway speeds for about 10–20 minutes to complete the relearn.
If your model presents a different menu path, refer to the owner’s manual for the exact labels and steps.
Model-specific notes
Because Honda models vary by year and trim, the precise procedure can differ. Here are quick notes for common configurations:
Older Hondas (pre-2018)
Typically rely on a TPMS reset button near the steering column or under the dash, with a drive to relearn. Check the manual for the exact location and the blink pattern.
Recent Civics and Accords (with digital displays)
Often provide a TPMS Calibration option in the vehicle’s information display under Settings or Vehicle. Follow the on-screen prompts and then drive to complete the relearn.
What to do if the light stays on
If the TPMS light remains illuminated after attempting these resets, there may be a sensor fault, a slow tire leak, or a dead sensor battery. Have the tires inspected with a TPMS diagnostic tool to identify faulty sensors or leaks.
Summary
Resetting the tire pressure light on a Honda generally involves inflating all tires to the recommended cold pressures, choosing the reset method that matches your model (manual TPMS button or instrument-cluster calibration), performing the reset, and driving to complete the relearn. If the light persists, consult the owner’s manual or a dealer to diagnose potential sensor or tire issues.