In a 2017 Jeep Cherokee, the oil you use depends on the engine installed. The most common setup uses 0W-20 synthetic oil for the 2.4L Tigershark I4, while the 3.2L Pentastar V6 typically calls for 5W-20 synthetic. If your Cherokee has the 2.0L turbo, consult the owner's manual for the exact specification. Either way, use a high-quality full synthetic oil that meets Chrysler's MS-6395 specification.
Engine options in the 2017 Jeep Cherokee
Here's a quick look at the engines that might be installed in a 2017 Cherokee and the typical oil guidance for each.
- 2.4L Tigershark I4 — commonly uses 0W-20 synthetic oil (full synthetic) per Mopar/Chrysler spec.
- 3.2L Pentastar V6 — commonly uses 5W-20 synthetic oil (full synthetic) per spec.
- 2.0L turbo I4 — available on some trims; correct viscosity varies by model year, so check the owner’s manual or under-hood label.
Oil requirements vary by engine; always verify with your owner’s manual, the oil cap, or a dealership to ensure you have the right viscosity and specification for your exact engine.
Oil viscosity and specifications by engine
Use only oils that meet Chrysler's MS-6395 specification and are rated for API SN or newer and ILSAC GF-5 or newer. The recommended viscosity by engine typically is:
- 2.4L Tigershark I4 — 0W-20 synthetic oil.
- 3.2L Pentastar V6 — 5W-20 synthetic oil.
- 2.0L Turbo I4 — check the owner's manual for the correct specification; it varies by market and trim.
These guidelines ensure proper lubrication, fuel efficiency, and warranty compliance. Always verify actual numbers for your exact vehicle.
Maintenance tips: oil changes and checks
Regular oil changes are essential. If you drive under heavy load or in extreme temperatures, consult the manual for potential more frequent changes. It is best practice to use a high-quality synthetic oil and to replace the oil filter at each change. Check the oil level monthly with the dipstick and top up as needed.
Summary
The 2017 Jeep Cherokee uses different oils depending on the engine. In most cases, 0W-20 synthetic is recommended for the 2.4L I4, while the 3.2L V6 typically calls for 5W-20 synthetic. The 2.0L turbo engine requires checking the manual for the exact specification. Always use oil that meets Chrysler MS-6395/API SN or newer and ILSAC GF-5 or newer. When in doubt, consult your owner's manual or a Jeep dealership for the exact oil spec for your vehicle.
What are the common Cherokee repairs?
The most common Jeep Grand Cherokee problems include transmission issues, electrical problems, suspension wear, oil leaks, and brake wear, especially on certain older model years.
What oil is recommended for a 2017 Jeep Cherokee?
Mobil 1 – High Mileage 0W-20 Full Synthetic Motor Oil, Extends Engine Life, 5 Quart (Part No. 15015)
Can I use 5W30 instead of 5W20 in my Jeep Cherokee?
Grand Cherokee oil requirements depend on your model year and engine configuration. Most 2016-newer models with the 3.6L Pentastar V6 require 0W-20 synthetic oil, while earlier models may specify 5W-20 or 5W-30. The 5.7L HEMI V8 typically uses 5W-20 (2011-2021) or 0W-20 (2022-newer), while SRT models require 0W-40.
What oil is best for a Jeep Cherokee?
The 2022 Cherokee's engine sizes and oil types are:
- 2.0L Engine – Mopar Certified SAW 5W-30 Full Synthetic Engine Oil.
- 2.4L Engine – Mopar SAE 0W-20 Full Synthetic Engine Oil.
- 3.2L Engine – Mopar SAE 5W-20 Full Synthetic Engine Oil.