The 2016 Chrysler Town and Country uses a standard 12-volt automotive battery. The typical OEM replacement is a Group Size 58R flooded lead-acid battery rated around 730 cold-cranking amps (CCA).
In practice, battery size and specifications can vary a bit by climate, trim, and whether the original equipment included an upgraded option. Always confirm by checking the vehicle's owner manual or the label on the existing battery before buying a replacement.
Typical battery specifications for this model
What follows are the specs you’re most likely to encounter when replacing the battery on a 2016 Town and Country.
- Group Size: 58R (a common fit for this model)
- Battery Type: Flooded lead-acid (standard automotive battery); AGM options exist as aftermarket upgrades, but are not usually required
- Voltage: 12 volts
- Cold Cranking Amps (CCA): typically around 730 A (range often 700–750 depending on supplier and climate)
- Reserve Capacity (RC): typically about 100–120 minutes
- Terminal type: Top-post terminals (positive and negative on the top surface)
Note: exact CCA and RC values can vary by region and supplier; always match the label on the battery or the specifications in the owner’s manual when purchasing.
How to ensure you select the right battery
Before purchasing a replacement, use these steps to verify you’re choosing the correct battery for your vehicle.
- Check the owner’s manual or the battery label for the recommended Group Size and CCA rating.
- Compare the current battery’s group size stamped on the label or case with standard references for the 2016 Town and Country.
- Consider climate and driving needs: higher CCA for cold climates; longer RC for hot, stop-and-go driving.
- Decide between flooded lead-acid (most common) and AGM. AGM can offer longer life and better performance in extreme conditions but may require a compatible charging system.
- Ensure the replacement fits the battery tray and has compatible terminal placements.
Concluding takeaway: For a 2016 Town and Country, expect a 12V flooded lead-acid battery, with Group Size 58R being typical; verify with the manual or battery label and factor in climate-driven specs when choosing a replacement.
Summary
The 2016 Chrysler Town and Country generally uses a standard 12-volt flooded lead-acid automotive battery, with Group Size 58R as the common replacement fit and around 730 cold-cranking amps. Always confirm exact specifications from the owner’s manual or the current battery label, and consider climate and usage when selecting an upgrade (such as an AGM option).