The cargo bed on most U.S.-spec Ford Rangers is 5 feet long, with some international variants offering a longer 6-foot bed. This article breaks down the typical bed sizes, their dimensions, and what they mean for how you load and use the truck.
Bed configurations in the Ranger lineup
The Ranger’s bed size varies by market and cab configuration. In the United States, the standard setup is a 5-foot bed paired with the SuperCrew cab. In other regions, a longer 6-foot bed may be available depending on the trim and model year. The following section outlines the main options and approximate measurements.
- Short bed (about 5 feet long): floor length approximately 60 inches; interior width between wheel wells about 44 inches; overall bed width around 58 inches; side walls roughly 21 inches high; estimated cargo volume around 30 cubic feet behind the cab.
- Longer bed (about 6 feet long): floor length approximately 72 inches; same interior width and overall width; side walls height similar; estimated cargo volume around 38–40 cubic feet behind the cab.
These figures are approximate guides and can vary by model year, trim level, and market. For precise specifications, consult the official Ford brochure or the window sticker for your year and region.
Key dimensions and payload considerations
Knowing the bed size helps with planning loads, choosing accessories, and determining how much cargo you can carry behind the cab. Payload capacity and bed features (such as tie-downs and bed rails) also vary by engine, drivetrain, and trim.
Short bed details (U.S. market)
The typical U.S. Ranger configuration uses a 5-foot bed on the SuperCrew. This size provides substantial cargo space while maintaining a more compact footprint for urban use. Access to the bed, load distribution, and accessory fit depend on the exact engine and trim.
Longer bed details (global markets)
In some export markets, a 6-foot bed is available with compatible cab configurations. The longer bed increases total cargo volume and makes it easier to haul longer items, though it can result in a longer overall vehicle footprint.
What this means for buyers
For shoppers, bed length affects cargo space and versatility. If you regularly haul long items or need extra behind-the-cab space, a longer bed (where offered) may be advantageous. For daily driving and typical tool-hauling, the 5-foot bed is often sufficient and can offer easier parking and maneuverability.
Always verify the exact bed length and payload with the dealer or the official Ford specifications for your year and region before purchasing accessories or planning heavy loads.
Summary
The Ford Ranger’s cargo box is typically 5 feet long in the United States, with a longer 6-foot bed available in some international markets. Bed dimensions—length, width, and height—shape cargo capacity and load versatility, while payload varies by engine and trim. Check the official specs for your year and market to be certain, and use this as a guide to compare how different configurations fit your needs.
Do Ford Rangers have different bed sizes?
The 2025 Ford Ranger offers two primary configurations: SuperCab: This model features a longer bed, measuring approximately 72.8 inches in length. SuperCrew: Designed for those who prioritize cabin space, the SuperCrew comes with a bed length of about 61 inches.
What are the dimensions of a Ford Ranger box?
Standard Bed Dimensions
If you are eyeing the latest Ranger, here is exactly how much space you have to work with: Inside Length (at floor): 59.6 inches (approx. 5 feet) Width (between wheelhouses): 48.2 inches.
What size tool box will fit a Ford Ranger?
The standard tool box size for a Ford Ranger is typically around 63.875" long by 20" wide, particularly crossover or cross-bed-style boxes. However, sizes can vary depending on the truck bed style and storage needs. Slim tool box options for the Ranger offer a more compact fit at around 63.875" long by 12.75" wide.
Can you fit a 4x8 sheet of plywood in a Ford Ranger?
But for the Ranger, a 4x8 will fit, even if you have to drop the tailgate and get the 4x8 diagonal from a wheel well to the bed rail.