The Honda Navi uses a 12-volt sealed lead-acid battery, typically around 3.5–4Ah, mounted under the seat.
In practice, this is a standard motorcycle battery type for small scooters, designed for maintenance-free operation and reliable starting power. Exact capacity can vary by market and model year, so check your owner's manual or dealer for the precise spec on your Navi.
Battery type and specs
The Navi's electrical system runs on a 12V battery that is usually a sealed lead-acid type with maintenance-free construction. Capacity is typically 3.5 to 4Ah, sufficient for starting the engine and powering lights and electrical accessories during normal riding.
Below are typical characteristics and consumer notes.
- Voltage: 12V
- Battery type: sealed lead-acid (SLA), maintenance-free
- Capacity: commonly 3.5–4Ah
- Location: under the seat, with easy access for maintenance or replacement
- Replacement interval: often around 2–3 years with normal use; hot climates may shorten life
Conclusion: The Navi uses a standard 12V SLA battery; verify the exact capacity for your bike’s year and market.
Maintenance and replacement guidance
Maintaining a healthy Navi battery helps ensure reliable starts and electrical performance. The following steps cover checking, charging, and replacing the battery.
Before proceeding with a battery check or replacement, ensure the scooter is off and the ignition key is removed, and disconnect any accessories that may draw power.
- Locate the battery under the seat; disconnect the negative (-) terminal first, then the positive (+).
- Inspect for corrosion on terminals and clean if needed using a solution of baking soda and water; dry thoroughly.
- Check the battery’s overall condition: swelling, leakage, or a cracked case means replacement is required.
- Measure the voltage with a multimeter; a healthy 12V battery typically reads around 12.6V to 12.8V when fully charged (resting).
- Charge with a compatible motorcycle battery charger if voltage is low; avoid overcharging, which can shorten life.
- If replacement is needed, select a 12V SLA battery with about 3.5–4Ah capacity and the same size as the original; connect strictly in correct polarity (+ to +, – to –) and secure the mounting.
Conclusion: Proper maintenance, correct charging, and choosing an appropriately sized 12V SLA battery will keep the Navi reliable in daily use.
Market variations and buying tips
Battery specifications can vary by market and model year. Always check the owner’s manual, your bike’s battery label, or your Honda dealer for the exact battery part number and capacity for your Navi.
In general, plan to replace the Navi’s 12V battery every 2–3 years under typical usage; hotter climates and frequent short trips can reduce life expectancy.
Summary
Answer: The Honda Navi uses a 12-volt sealed lead-acid battery, typically around 3.5–4Ah, located under the seat and designed as maintenance-free. Capacity and exact part numbers may vary by market and year, so verify with official sources. Regular inspection, proper charging, and timely replacement extend reliability for daily commuting.
What is the best battery for the Honda Navi?
The AJC-PS-ATX5L-544583 is the best replacement battery for the Honda NVA110B Navi 1108CC Motorcycle Battery (2022).
What kind of batteries does Honda use?
Types of Batteries for Honda Vehicles
Honda vehicles typically require either lead-acid or AGM (Absorbent Glass Mat) batteries. Each type has distinct features that cater to different driving conditions and vehicle requirements.
What kind of battery is in a Honda Navi?
12 Volt, 4 Amp Premium AGM Sealed Maintenance Free Battery. RG5L-BS In stock.
What voltage is the battery in the Honda Navi?
12V 5AH
New 12V 5AH SLA Battery For Honda Navi Pocket Bike.