There isn’t a single oil filter number that fits every 2012 Camry. The correct part depends on the engine, and Mobil 1-brand filters have cross-reference options that align with the car’s two engine choices from that year.
In 2012, Camry models were equipped with either a 2.5-liter four-cylinder engine (2AR-FE) or a 3.5-liter V6 engine (2GR-FE). Each engine uses a different oil filter, so the Mobil 1 model you choose will depend on which engine your car has. In many Mobil 1 catalogs, the cross-reference suggests M1-110A for the 2.5L four-cylinder and M1-113A for the 3.5L V6, but always verify compatibility with your vehicle’s VIN and regional catalogues.
Two engines, two filter paths
The Camry’s two engine options from 2012 each require their own oil filter reference. The Mobil 1 filter numbers listed as cross-references correspond to the engine type rather than the model year alone.
2.5L four-cylinder (2AR-FE)
For the 2.5-liter four-cylinder Camry, Mobil 1 cross-references commonly point to M1-110A as a compatible filter model. This cross-reference is widely used in many catalogs for Camry 2AR-FE applications, though regional variations can occur.
- Mobil 1 filter model: M1-110A (commonly referenced for the 2.5L Camry)
Compatibility should be confirmed with your VIN and local parts catalog, as regional listings may differ slightly.
3.5L V6 (2GR-FE)
For the 3.5-liter V6 Camry, Mobil 1 cross-references frequently point to M1-113A as the appropriate filter model. This aligns with many catalogs that serve the 2GR-FE-equipped Camry models, though you should verify exact fit for your vehicle.
- Mobil 1 filter model: M1-113A (commonly referenced for the 3.5L Camry)
As with the four-cylinder option, always confirm with your VIN and the regional catalog to ensure correct fit and threading, especially if you’re shopping outside North America.
How to confirm the exact part
To ensure you’re purchasing the correct filter, follow these steps. They help you avoid mismatches caused by regional variations or minor model-year tweaks.
- Check the engine code on your car: 2AR-FE indicates the 2.5L engine; 2GR-FE indicates the 3.5L engine.
- Consult Mobil 1’s official cross-reference catalog or your local parts retailer’s database using year, model, and engine code.
- Compare the filter’s thread size, gasket diameter, and height to the existing filter or the service manual specifications.
- If shopping online, enter your Vehicle Identification Number (VIN) to pull exact part recommendations for your specific vehicle configuration.
Following these steps helps ensure you pick the correct Mobil 1 oil filter model for your exact Camry build, even if regional catalogs use slightly different cross-references.
Summary
For a 2012 Toyota Camry, the oil filter number is not universal. The correct Mobil 1 filter depends on the engine: M1-110A is commonly used for the 2.5L four-cylinder (2AR-FE), and M1-113A is commonly used for the 3.5L V6 (2GR-FE). Always verify with your VIN and local catalog to confirm the exact fit, and when in doubt, ask a qualified parts advisor to cross-check the part against your vehicle’s specifications.