Skip to Content
103 State St East Jordan, MI, 49727
  • MON: Closed
  • TUES: 8:00AM - 6:00PM
  • WED: 8:00AM - 6:00PM
  • THUR: 8:00AM - 6:00PM
  • FRI: 8:00AM - 6:00PM
  • SAT: Closed
  • SUN: Closed
MORE >
  • Yelp
  • Google Business Profile
  • Facebook
7984 North St Central Lake, MI, 49622
  • MON: 8:00AM - 6:00PM
  • TUES: 8:00AM - 6:00PM
  • WED: 8:00AM - 6:00PM
  • THUR: 8:00AM - 6:00PM
  • FRI: Closed
  • SAT: Closed
  • SUN: Closed
MORE >
  • Yelp
  • Google Business Profile
  • Facebook

How much oil goes in a 2022 Honda Pilot 3.5 L?

The 2022 Honda Pilot with the 3.5 L V6 engine requires about 5.0 quarts (4.7 liters) of engine oil when performing an oil change with a new filter, using 0W-20 full synthetic oil.


This article explains the official capacity and recommended oil specifications for the 3.5 L Pilot, and provides practical guidance for maintenance and DIY oil changes.


Official oil capacity and specifications


Key figures you need when planning an oil change or shopping for oil and filters.



  • Oil capacity (including filter): 5.0 quarts (4.7 liters)

  • Recommended oil: 0W-20 full synthetic

  • Filter: Replace with every oil change

  • Dipstick check: Recheck level after the engine has reached operating temperature

  • Notes: Use Honda Genuine or equivalent quality oil meeting SAE 0W-20 specification


Following these specifications helps ensure proper lubrication, performance, and warranty alignment for the 2022 Pilot’s 3.5 L V6.


How to perform an oil change on the 2022 Honda Pilot


If you plan to do it yourself, here is a practical, step-by-step guide to performing an oil and filter change while observing safety and disposal guidelines.


Before you start, gather supplies such as the correct oil (0W-20), a suitable oil filter, a drain pan, a funnel, a jack and stands (or ramps), and basic hand tools.



  • Step 1: Warm up the engine briefly to operating temperature, then park on a level surface and engage the parking brake.

  • Step 2: Place the drain pan underneath the oil pan and remove the oil drain plug to drain the old oil completely.

  • Step 3: Remove the old oil filter, install a new filter, and lightly lubricate the gasket with fresh oil.

  • Step 4: Reinstall the drain plug securely and pour new oil through the filler cap using a funnel, adding up to 5.0 quarts (4.7 L) as the target total.

  • Step 5: Start the engine and run for a minute, then turn it off and check for leaks. Wait a few minutes, then check the oil level with the dipstick and add more if needed to reach the Full mark.

  • Step 6: Replace the filler cap, clean up any spills, and properly dispose of the used oil and filter at an approved facility.


Following these steps helps ensure a clean removal and accurate refill, while maintaining engine protection and compliance with local disposal regulations.


Additional considerations


Climate, driving style, and towing can influence service intervals and oil selection. Always follow the vehicle’s maintenance minder and the owner’s manual for model-specific guidance.


The 0W-20 full synthetic oil is chosen for its balance of protection, efficiency, and cold-start performance in the 3.5 L V6 engine used by the Pilot.


Summary


For the 2022 Honda Pilot with the 3.5 L engine, plan for about 5.0 quarts (4.7 liters) of engine oil with a new filter, using 0W-20 full synthetic oil. Use the maintenance minder or manual guidance to set oil-change intervals, and consider a DIY oil change if you have the proper tools and safety precautions. Always verify the exact specification in the owner’s manual or with a certified Honda technician for any model-specific nuances.

Related Articles

Ryan's Auto Care

Ryan's Auto Care - East Jordan 103 State St East Jordan, MI 49727 231-222-2199
Ryan's Auto Care - Central Lake 7984 North St Central Lake, MI 49622 231-544-9894

Ask any car or truck owner in Central Michigan who they recommend. Chances are they will tell you Ryan's Auto Care.