The front wiper blades for the 2014 Honda CR-Z are typically 22 inches on the driver’s side and 20 inches on the passenger’s side, with a rear blade of about 11 inches if your model has a rear wiper. Sizes can vary by market and trim, so it’s best to confirm with the owner’s manual or a parts retailer before purchasing.
Wiper blade sizing is a common point of confusion for owners, because manufacturers may swap suppliers, adjust moldings, or update trims across regions. This article provides the typical sizes used for most 2014 CR-Zs and explains how to verify the exact fit for your car.
Front wiper blade sizes
Below are the sizes most commonly used on the front of a 2014 Honda CR-Z. These measurements reflect the standard North American specification, but variations can occur by region or trim level.
- Driver’s side blade: 22 inches
- Passenger’s side blade: 20 inches
In practice, many retailers list 22" for the driver side and 20" for the passenger side as the correct combination for this model year. Always check the packaging or your vehicle’s owner manual to confirm.
Rear wiper blade size (if equipped)
If your CR-Z is equipped with a rear wiper, its blade is typically smaller than the front blades. Use the rear blade size listed by Honda for the 2014 CR-Z or measure the existing blade to ensure a proper fit.
- Rear blade: commonly around 11 inches (check the specific rear wiper for your vehicle)
Rear wiper sizes are often model-specific and can differ from the front blades, so verifying the exact measurement is advised to avoid an ill-fitting blade.
How to verify the correct size for your car
To ensure you buy the right blades, you can take several steps. Start with the owner’s manual, which lists the exact blade lengths. If the manual isn’t handy, you can measure the current blades or use a trusted parts retailer’s compatibility tool by inputting your vehicle’s year, make, and model. When shopping, look for the exact size pair (driver and passenger) or a manufacturer-recommended replacement. If in doubt, bring the old blades to the store so you can compare fits directly.
Tips for replacement and maintenance
Install new blades on a dry, cool day to avoid damage to the rubber. Clean the wiper arms before installing new blades to ensure a secure fit. Regularly inspect blades for cracks, tears, or glazing, and replace them at least once a year or whenever they begin streaking or skipping across the windshield.
Summary
For the 2014 Honda CR-Z, the typical front wiper sizes are 22 inches on the driver’s side and 20 inches on the passenger’s side, with an optional rear wiper blade around 11 inches if your vehicle has one. Always verify the exact sizes via the owner’s manual or a reputable parts retailer, as regional and trim variations can occur. Keeping the correct sizes on hand helps ensure clear, streak-free visibility and safer driving in adverse weather.