The Fram oil filter number that fits most 2012 Honda Civics (1.8L engines) is PH7317 (Extra Guard). For higher filtration and longer life, you can also use XG7317 (Ultra Synthetic).
In this article, we’ll outline which Fram part numbers are commonly recommended for the 2012 Honda Civic, explain when to use each option, and describe how to verify compatibility with your exact trim and engine size (LX/EX/EX-L versus Si). The 2012 Civic lineup includes both a 1.8L engine and a 2.0L Si variant, which can affect the right filter choice.
Common Fram part numbers for the 2012 Civic
These Fram filters are commonly listed as fitting the 1.8L Civic used in 2012 models. Always cross-check with Fram’s official fitment catalog to confirm compatibility with your exact vehicle configuration.
- Fram Extra Guard PH7317
- Fram Ultra Synthetic XG7317
Both PH7317 and XG7317 are widely used on the 1.8L Civic family and are interchangeable in many standard maintenance scenarios. If you’re unsure about your engine variant, consult Fram’s cross-reference or your owner’s manual.
Engine variants and compatibility notes
The 2012 Honda Civic lineup includes 1.8L LX/EX/EX-L models and the 2.0L Si variant. The filter numbers above are typically associated with the 1.8L engines, while Si buyers should verify with Fram’s catalog to avoid mismatches. When in doubt, confirm the exact engine size and cross-reference the part number with Fram’s fitment tool or a trusted parts retailer.
How to verify the right filter for your car
Verification steps help ensure you select the correct Fram filter for your exact Civic configuration and driving needs.
- Check your owner’s manual for the recommended filter and oil specification.
- Compare the filter’s model number against Fram’s fitment list for year, make, model, and engine size.
- Cross-check the filter’s thread size and gasket diameter with your current filter or the housing specification.
- When in doubt, ask a parts professional or use Fram’s online fitment tool or catalog.
By following these steps, you’ll minimize the risk of choosing the wrong filter and ensure proper oil flow and engine protection for your 2012 Civic.
Summary
For the typical 2012 Honda Civic with the 1.8L engine, Fram PH7317 (Extra Guard) is the standard choice, with Fram XG7317 (Ultra Synthetic) as a higher-performance alternative. If you own the 2.0L Si variant, verify compatibility with Fram’s catalog or cross-reference tools to ensure the correct filter is selected for your specific engine configuration.
What oil is recommended for a 2012 Honda Civic?
Oil Grade: API*
| Viscosity: | 0W-20 (All TEMPS) |
|---|---|
| Capacity: | 3.9 quarts (with filter). After refill check oil level. |
| Capacity: | 3.7 quarts. w/of. After refill check oil level. |
| Torque: | 29 ft/lbs (Oil Drain Plug) Install a new washer on the drain bolt. Only use an OE drain plug. |
What does a PH7317 FRAM filter fit?
This Item Fits the Following Vehicles:
| Year | Make | Model |
|---|---|---|
| 22-13 | ACURA | ILX |
| 26-23 | ACURA | INTEGRA |
| 26-24 | ACURA | INTEGRA |
| 20-17 | ACURA | MDX |
What oil filter does a Honda Civic use?
15400-PLM-A02) Genuine Honda original equipment oil filter for your Honda vehicle. Engineered and specified by Honda, this is the same filter as that which would be installed by your dealer.
What oil filter does a 2012 Honda Civic take?
This OEM Honda oil filter, part number 15400-PLM-A02, fits select Honda vehicles from model years 2000 all the way to 2021. Its job is to collect both the impurities in motor oil and whatever else accumulates as the oil lubricates engine parts.