For most 2008 Buick Lucerne models with the 3.8-liter V6, Fram’s PH8A oil filter is the typical match. If your Lucerne uses the 4.6-liter Northstar V8, Fram’s cross-reference commonly lists PF52A. Always verify with Fram’s vehicle lookup to ensure the exact fit for your engine configuration.
Understanding the engine options in the 2008 Lucerne
The 2008 Buick Lucerne was offered with more than one engine option. The most common setup in many trims is the 3.8-liter V6 (3800 Series II). Some late-model or higher-end configurations may feature a larger V8 option, such as the 4.6-liter Northstar, depending on the market and trim level. The correct Fram oil filter number depends on which engine is in your specific vehicle.
Before selecting a filter, identify your engine to avoid a mismatch. Fram publishes fitment data that ties specific filter part numbers to engine codes, vehicle years, and configurations. When in doubt, use Fram’s online lookup or consult your owner’s manual.
- 3.8L V6 (3800 Series II): Fram PH8A is commonly recommended as the replacement oil filter.
- 4.6L Northstar V8: Fram’s cross-reference frequently lists PF52A (verify with Fram’s vehicle lookup tool or local parts counter).
Conclusion: The exact Fram filter number depends on the Lucerne’s engine. The PH8A is the typical choice for the 3.8L V6, while PF52A is often used for the Northstar 4.6L variant. Always confirm with the official Fram lookup to ensure compatibility with your specific VIN and engine code.
How to confirm the right filter for your Lucerne
To avoid incorrect fitment, follow these steps before purchasing:
- Check the engine code or VIN to determine whether your Lucerne uses the 3.8L V6 or a Northstar 4.6L V8.
- Visit Fram’s official website or use their “Shop by Vehicle” tool and input your year, make, model, and engine to see exact part numbers.
- If shopping in a store, ask the parts counter for the Fram filter that matches your engine code (they can cross-check the VIN).
- Compare the thread size and gasket diameter on the old filter with the replacement to ensure a proper seal.
Note: Fram also offers different lines (e.g., Extra Guard, Extra Guard Ultra, XG Series) that may use the same base part numbers but with varying filtration media. Always confirm the exact part number and compatibility for your vehicle’s configuration.
Summary
The 2008 Buick Lucerne’s oil filter number from Fram depends on the engine. The 3.8L V6 commonly uses PH8A, while the 4.6L Northstar V8 is typically listed with PF52A. Always verify with Fram’s vehicle lookup or your owner’s manual to ensure the correct filter for your exact engine and VIN. Regularly replacing the oil filter with the correct Fram part helps maintain engine performance and longevity.
What kind of oil does a Buick Lucerne 2008 take?
synthetic 5W-30 motor
Full synthetic 5W-30 motor oil that is made with natural gas and designed to maximize engine protection.
What cars are compatible with FRAM fe3614?
Vehicle Compatibility: Fits select vehicles including various models of Ford Focus, Escape, Fusion, Explorer, Ranger, Bronco Sport, Volkswagen Jetta, Taos, Toyota Tacoma, Sienna, Tundra, Highlander, FJ Cruiser, Lexus RX, Jeep Wrangler, and Chrysler Town & Country.
What is the oil filter number for a 2009 Buick Lucerne FRAM?
PH9837
FRAM PH9837 Extra Guard® Oil Filter | FRAM.
What does a PH10575 fit?
This product fits in a few models ofFord F150 in Canada, Ram 1500 accessories, GMC Sierra 1500, Chevrolet Silverado 1500, Ford Escape, Jeep Grand Cherokee, Ford Mustang, Dodge Dakota, GMC Sierra 2500, Chevrolet Silverado 2500, Chevrolet Equinox, Ford Explorer, Ford Edge, Ford Fusion, Jeep Liberty.