The typical lug nuts for a 2019 Jeep Renegade are M14x1.5 with a 60-degree conical seat, used with a 19 mm (3/4 inch) wrench size, on a 5x110 mm bolt pattern. Verify this against your exact trim or any aftermarket wheels, but this configuration is the common standard for the model.
Key specifications for Renegade lug nuts
Below are the core dimensions and seating details you’ll need when sourcing replacements or checking compatibility with wheels.
Thread size and seat type
Most 2019 Renegade models use M14x1.5 lug nuts with a conical (60-degree) seat. The wheel bolt pattern is 5x110 mm. If you have aftermarket wheels, confirm these specs to ensure proper fitment.
- Thread size: M14x1.5
- Seat type: conical (60-degree)
- Bolt pattern: 5x110 mm
These specs help you locate correct OEM replacements or compatible aftermarket nuts and ensure the wheels seat properly on the studs.
Hex size / wrench socket size
The standard lug nut hex size for these nuts is typically 19 mm. Some aftermarket nut sets may use a different size, so confirm with the supplier or measure the current nuts if you’re unsure.
- Hex size: 19 mm
- Alternatives: 21 mm may appear in some aftermarket configurations; verify before purchasing
Using the correct socket size protects the flats of the nut and reduces the risk of stripping during installation or removal.
Torque and installation reminders
Proper torque is essential for wheel retention and safety. While exact specifications can vary by trim and wheel package, a typical target for the Renegade is around 70 ft-lb (roughly 95 Nm), applied in a star pattern and rechecked after initial road testing. Always consult your owner’s manual or dealer for the precise torque for your vehicle.
- Recommended torque: approximately 95 Nm (70 ft-lb)
- Pattern: star sequence, then recheck
Using the correct torque and pattern ensures even clamping and reduces the chance of lug nut loosening over time.
Summary
For a 2019 Jeep Renegade, expect lug nuts sized M14x1.5 with a 60-degree conical seat, fitting a 5x110 bolt pattern, and requiring a 19 mm hex socket. Always verify these specs against your specific trim and wheel package, and torque to the OEM guidelines using a star pattern for safe wheel installation.