What headlight bulb does a 2014 Honda CRV take?

In most 2014 Honda CR-Vs, the low-beam headlight uses an H11 bulb, while the high-beam headlight uses a 9005 bulb. If your vehicle has fog lights, those typically use H11 as well. Variations can occur by market and trim, so it’s best to verify with the owner’s manual or by inspecting the bulb itself.

The question covers which bulbs are used in the factory headlight system for the 2014 CR-V. Bulb types can differ by region and trim level, and some models may have optional HID or LED setups that change the bulb requirements. Below is a practical guide to the typical configuration and how to confirm it for your specific car.

Bulb types by function

The following describes the bulbs most commonly found in the 2014 CR-V by headlight function. Variations may exist, so use this as a reference and verify on your vehicle.

• Low-beam headlights: H11


• High-beam headlights: 9005 (HB3)


• Fog lights: H11 (when the vehicle is equipped with fog lamps)

In summary, the typical setup for a 2014 Honda CR-V is low-beam H11, high-beam 9005, with fog lamps (if equipped) using H11. Always confirm for your specific trim and market.

How to verify and replace bulbs

To ensure you buy the correct replacements and install them correctly, follow these practical steps. This process applies to standard halogen configurations; if your CR-V has HID or LED headlights, consult the manual or a technician for the appropriate procedure.

1. Park on a level surface and turn off the engine; engage the parking brake and allow the lights to cool if recently used.


2. Open the hood and locate the rear of the headlight assembly. Remove the dust cover if present by turning it counterclockwise.


3. Disconnect the electrical connector from the bulb housing, then release any retaining clip or socket that holds the bulb in place.


4. Remove the old bulb carefully, avoiding touching the glass with bare fingers (oil from skin can shorten bulb life).


5. Install the new bulb, ensuring it seats properly and align the tabs or pins as required by the design.


6. Reconnect the electrical connector, reseat the dust cover, and test the headlights before closing the hood.

If bulb replacement doesn’t resolve a headlight issue, issues may include wiring, ballast (for xenon systems), or wiring harness corrosion. In that case, consult a qualified technician.

Notes by market and trim

United States and Canada

In typical US/Canada-spec 2014 CR-Vs, the low-beam headlight is H11 and the high-beam is 9005. Fog lights, when equipped, usually use H11 as well. Always confirm with the owner’s manual or by inspecting the current bulb.

Other markets

Bulb configurations can vary internationally. Some markets may use different low-beam configurations or factory-installed HID options. If you’re in a region outside North America or have a non-standard trim, check the manual or contact a local Honda dealer to avoid mismatched replacements.

Summary

For a 2014 Honda CR-V, the common configuration is low-beam H11, high-beam 9005, and fog lights H11 where equipped. Verify your specific vehicle’s bulb type in the owner’s manual or by inspecting the bulb in the headlight assembly, as trim and regional differences can apply. When replacing bulbs, handle new bulbs carefully and follow proper installation steps to ensure optimal performance and safety.

What is the part number of the headlight on a 2014 Honda CR-V?

33150-T0A-A01
33150-T0A-A01 - Headlight Assembly L - 2012-2014 Honda CR-V | Honda Factory Parts.

Which CR-V is the fastest?

When it comes to speed and acceleration, the Honda CR-V stands out as the fastest SUV in Honda's lineup, particularly the Hybrid Sport Touring model. This version achieves a remarkable 0 to 60 mph time of approximately 7.7 seconds, which is impressive among compact SUVs.

What headlight bulbs do I need for a 2014 Honda CR-V?

Honda CR-V (2012-2014) Bulb Size Chart

What type of headlights does the Honda CR-V have?

light-emitting diode (LED)
All CR-V trims feature light-emitting diode (LED) headlights.