The lug nuts on a 2016 Honda Pilot are M12 x 1.5 threads with a 60-degree conical seat, used on a 5x120 mm bolt pattern; typically tightened with a 19 mm socket to about 80 ft-lb (108 N·m).
In this article, we break down the official specifications for the stock wheels, explain how to identify the correct lug nut size on your vehicle, and offer practical guidance for safe installation and maintenance—including considerations if you upgrade to aftermarket wheels.
Standard lug nut specs for the 2016 Pilot
Key specifications for stock wheels on the 2016 Pilot include the following details:
- M12 x 1.5 thread size
- 60-degree conical seat
- 5x120 mm bolt pattern
- 19 mm lug nut hex size
- Torque specification: 80 ft-lb (108 N·m)
Note that variations can occur with different wheel packages or aftermarket hardware, so always verify with your owner’s manual or dealer if you’re unsure.
How to verify lug nut compatibility and installation
To ensure proper fitment, compare your wheel and lug nut data against the vehicle’s official specifications. Check the door jamb sticker or owner's manual for the exact wheel and torque requirements, especially if you have replaced wheels or lug nuts. After installation, recheck torque after initial driving (typically after 50–100 miles) to confirm even seating.
Summary
For a 2016 Honda Pilot, expect M12 x 1.5 lug nuts with a 60-degree conical seat, a 5x120 bolt pattern, and a 19 mm hex, torqued to about 80 ft-lb (108 N·m). Always confirm exact specs for your specific wheels via official sources or your dealer, especially if aftermarket parts are involved, and follow proper torque procedures to ensure safe operation.