The 2019 Lincoln Nautilus with the 2.0-liter EcoBoost engine typically requires about 5 quarts (4.7 liters) of engine oil when performing a standard oil change, including a replacement filter.
The 2.0L EcoBoost engine used in the Nautilus shares its oil capacity with other Ford-Lincoln models using the same engine family. Capacity can vary slightly depending on the oil filter and whether a full drain is performed, so consult the owner’s manual or the vehicle’s service bulletin for your VIN. The recommended oil grade is SAE 5W-30 synthetic.
Oil capacity and specifications
Here are the official figures and the recommended oil type for routine maintenance of the 2.0L EcoBoost in the 2019 Nautilus.
- Engine oil capacity: 5.0 quarts (4.7 liters) with a new filter.
- Recommended oil grade: SAE 5W-30, preferably full synthetic.
- Oil standards: Use oil that meets or exceeds API SP (or newer) requirements, per manufacturer guidance.
- Verification: After adding oil, run the engine briefly, turn it off, wait a few minutes, and check the level with the dipstick to ensure it's between the Minimum and Maximum marks.
Note that some car owners or dealers may report slight variation (for example, about 5.5 quarts in certain configurations or after certain filter choices). Always confirm with the owner's manual or dealer advice for your exact VIN.
Practical maintenance tips
Beyond the capacity, consider best practices for oil changes and level checks on the 2019 Nautilus 2.0.
- Use the recommended 5W-30 full-synthetic oil and an appropriate filter.
- Follow the service intervals suggested by Ford/Lincoln for synthetic oil, typically longer than conventional oils, but adjust for driving conditions.
- Disposal: Recycle used oil at an authorized facility and reset any oil life monitoring system if equipped.
Starting from a baseline of 5 quarts helps ensure adequate lubrication; always verify the level after a cooled engine and dispose of old oil properly.
Summary
The 2019 Nautilus with a 2.0L EcoBoost engine generally requires about 5 quarts (4.7 liters) of engine oil during an oil change, including the filter. Use SAE 5W-30 full synthetic oil and consult the owner’s manual or dealership for VIN-specific guidance.