The 2014 Corolla’s 1.8-liter engine requires 0W-20 full-synthetic motor oil, with a total capacity of about 4.4 quarts (4.2 liters) when including the filter.
Below is a detailed guide on the oil type, specifications, capacity, and maintenance considerations for the 2014 Corolla to help you keep the vehicle running smoothly.
Oil type and specifications
Key oil requirements for the Corolla’s 1.8L engine are summarized here.
- Oil type: 0W-20 full synthetic motor oil
- Certifications: API SN or higher; ILSAC GF-5 or newer
- Compatibility: Suitable for the 1.8L 4‑cylinder engine used in the 2014 Corolla
- Brand guidance: Toyota Genuine Motor Oil 0W-20 or any equivalent meeting the above specs
In short, use a 0W-20 synthetic oil that meets API SN and ILSAC GF-5 (or newer) standards, and ensure it is appropriate for the Corolla’s 1.8L engine.
Capacity and change intervals
Understanding how much oil your engine holds and when to change it helps ensure reliable performance.
- Oil capacity: 4.4 quarts (4.2 liters) with the oil filter
- Recommended oil: 0W-20 full synthetic
- Change intervals: Follow the vehicle’s maintenance minder or the owner’s manual; with synthetic 0W-20 and normal driving, many owners schedule changes around 7,500–10,000 miles, while severe service or extreme climates may require sooner intervals
Bottom line: adhere to Toyota’s maintenance minder and use the specified 0W-20 oil; intervals vary based on driving conditions and monitoring systems.
Practical tips for oil changes
If you change the oil yourself, here are general steps applicable to the 2014 Corolla. Always consult the owner's manual or a qualified technician for model-specific details.
- Warm the engine briefly to help the oil drain.
- Level the car on a firm surface and secure it.
- Drain the old oil from the drain plug and replace the crush washer if applicable.
- Replace the oil filter with a new one rated for the engine.
- Refill with 4.4 quarts of 0W-20 synthetic oil, then check the level with the dipstick.
- Start the engine, run briefly, then shut off and recheck the oil level; add oil if needed.
- Reset the maintenance minder or schedule service as required.
Note: Use proper safety procedures when working under a vehicle and dispose of used oil and filters according to local regulations.
Summary
The 2014 Toyota Corolla takes 0W-20 full synthetic motor oil for its 1.8-liter engine, with an oil capacity of about 4.4 quarts including the filter. It should meet API SN or higher and ILSAC GF-5 (or newer) specifications. Follow the maintenance minder or owner’s manual for oil-change intervals, which typically range around 7,500–10,000 miles under normal conditions but can be sooner in severe usage. Always verify with the manual or a Toyota service advisor for your specific vehicle and region.
Which engine oil is best for a Toyota Corolla?
What is the Recommended Oil Type for the Toyota Corolla? For Toyota Corolla models made in 2009 or later, Toyota recommends using 0W-20 synthetic motor oil. Meanwhile, Corolla models made in 2008 or earlier should use 5W-30 synthetic motor oil.
Can I use 5W-30 in my Toyota Corolla?
But if you want the best results, what is the recommended Toyota Corolla oil type? Most Corolla models use either 0W-20 synthetic or 5W-30 synthetic formulations.
What kind of oil do I need for a 2014 Toyota Corolla?
For Toyota Corolla models made in 2009 or later, Toyota recommends using 0W-20 full synthetic motor oil.
What is the weakness of the Toyota Corolla?
What are the disadvantages of the Toyota Corolla? Rear-wheel drive is not safe in icy roads, it has high fuel consumption, and the rear seat space is small. The engine start will not be as powerful as the turbocharged one.