The correct Mopar oil filter number for a 2010 Jeep Wrangler depends on the engine fitted in your specific vehicle; there isn’t a single universal part number for all 2010 Wranglers. The 2010 Wrangler could have different engine configurations in various regions, and the appropriate filter is tied to that engine code.
Why the number can vary
Vehicle model years can ship with different powertrains, and Mopar (Chrysler’s parts brand) assigns oil filter part numbers to specific engines. For the 2010 Wrangler, the most common engine in the U.S. market was the 3.8-liter V6, but regional variations or later production changes may utilize a different engine. Because the filter is engine-specific, using the wrong part number can lead to fitment issues or inadequate filtration.
How to find the exact Mopar oil filter number for your Jeep
To identify the correct part number, use tools and information that confirm your engine type and production date. The steps below explain how to locate the right Mopar oil filter for your 2010 Wrangler.
- Identify your engine code and production date. Check the vehicle identification number (VIN) and the engine label under the hood or consult your owner’s manual to determine the exact engine installed.
- Use the official Mopar Parts catalog or a dealer portal. Enter your VIN or engine code to pull up the specific oil filter options compatible with your vehicle.
- Compare part numbers. The catalog will list the Mopar part numbers for the applicable oil filters. Ensure you select the version matched to your engine and production date (not just the vehicle model year).
- Verify against the filter you have or plan to purchase. If you already have a filter, check the part number printed on the canister or packaging to confirm it matches the catalog for your engine.
By following these steps, you’ll confirm the exact Mopar oil filter number for your particular 2010 Wrangler, avoiding mistakes from mismatched parts.
Notes on common engines and guidance
In the 2010 Wrangler lineup, the most commonly encountered engine in North America is the 3.8-liter V6; some markets and later production changes may feature other powertrains. Because part numbers are engine-specific, always verify with the vehicle’s VIN and the Mopar Parts lookup to ensure you order the correct filter.
If you don’t have easy access to the Mopar catalog online, contact a Jeep dealership service department or a trusted auto parts retailer and provide your VIN. They can look up the exact Mopar oil filter number for your 2010 Wrangler based on the engine code and production date.
Summary: The Mopar oil filter number for a 2010 Jeep Wrangler is engine-specific rather than a single universal code. Confirm your engine type and production date via the VIN, then look up the exact Mopar part number in the official catalog or with a dealer. This ensures you get the correct filter for your specific vehicle.
What type of oil does a 2010 Jeep Wrangler take?
Jeep Wrangler Oil Type by Year & Engine — Complete Chart
| Engine | Model Years | Recommended Oil |
|---|---|---|
| 3.6L Pentastar V6 | 2007–2011 | SAE 5W-20 Conventional or Synthetic |
| 3.0L EcoDiesel V6 | 2020–2026 | SAE 5W-40 Full Synthetic Diesel |
| 3.8L V6 | 2007–2011 | SAE 5W-20 Conventional or Synthetic |
| 6.4L HEMI V8 | 2021–2026 | SAE 0W-40 Full Synthetic (API Starburst) |
What is the part number for the Mopar oil filter on a 2010 Jeep Wrangler?
Part # 04105409AE.
What does a Mopar Mo 409 oil filter fit?
Mopar oil filter 04105409AE (MO-409) - Original spare part
| Year | Brand | Model |
|---|---|---|
| 2010 | Chrysler | Town & Country |
| 2010 | Dodge | Grand Caravan |
| 2010 | Jeep | Wrangler |
| 2009 | Chrysler | PT Cruiser |
What does a Mopar Mo 899 oil filter fit?
Vehicle Compatibility: Fits various Chrysler, Dodge, and Ram models including 2012 Dodge Ram 1500 Sport, 2013 Ram 1500 ST, 2011-2015 Jeep Grand Cherokee Overland, and more. OE Specifications: Designed to Chrysler engineering's OE specifications to maintain peak engine efficiency and performance.