Front brake pad sets for a 2006 Chevy Impala generally cost about $25–$110 per axle, depending on brand and material; the rear brakes are drum brakes that use shoes, not pads, so only the front pads typically require replacement.
This article explains current price ranges, what drives cost differences, and where to shop for parts and service for the 2006 Impala’s braking system.
Overview of the braking setup on the 2006 Impala
The 2006 Impala typically uses front disc brakes and rear drum brakes. Pads apply to the front rotors, while the rear brakes use shoes inside a drum. Some trims may include ABS sensors and wear indicators on the front brakes.
Front brakes: disc rotors and pads
Front pads wear with the discs and are the most commonly replaced wear item on this model. Pad choice affects noise, dust, and rotor wear, and some drivers opt for low-dust ceramic options at a higher price.
Rear brakes: drums and shoes
Rear brake assemblies on many Impala trims use drum brakes with shoes inside. Replacement involves shoes (and sometimes hardware or wheel cylinders), which is a different pricing category than front disc pads.
Price ranges for front brake pads
Prices vary by material and brand. The ranges below reflect typical online and retail prices before tax and shipping as of 2026.
- Budget/organic pads: about $25–$40 per axle
- Standard semi-metallic pads: about $40–$70 per axle
- Premium ceramic/low-dust pads: about $60–$110 per axle
- High-performance or OEM-equivalent pads: about $90–$130 per axle
Note: Some pad kits include wear sensors, anti-squeal shims, or other hardware; rotors may be sold separately and can affect the total cost.
Price ranges for rear brakes (shoes)
Because the rear brakes on many 2006 Impala models are drums, pricing centers on shoes rather than pads. Typical ranges are:
- Basic brake shoe kits: about $15–$40 per axle
- Standard kits with hardware: about $30–$60 per axle
Labor for rear drum brake work varies by shop and region, and may include adjustments, hardware replacement, and potential wheel-cylinder service.
What affects the price?
Several factors influence total cost when replacing brakes on a 2006 Impala:
- Brand and material (organic vs. semi-metallic vs. ceramic)
- Whether rotors are resurfaced or replaced during the same service
- Inclusion of wear sensors, shims, or other hardware in the kit
- Regional labor rates and shop pricing
Where to shop and typical installation costs
You can purchase parts or have them installed at a variety of outlets. Common options include:
- Auto parts retailers: AutoZone, Advance Auto Parts, O'Reilly Auto Parts
- Manufacturer/OEM parts suppliers
- Dealership service departments and independent garages
Labor to install front pads generally runs about $80–$150 per axle, depending on rotor work and local rates. Rear drum brake labor tends to be similar, though exact quotes depend on whether shoes, drums, or wheel cylinders are replaced.
Summary
For a 2006 Chevy Impala, plan on roughly $25–$110 per axle for front brake pads, with higher-end ceramic options at the upper end of the range. Rear brakes are typically drum brakes using shoes, with lower per-axle costs for shoes and hardware. Always obtain a precise quote that itemizes parts and labor, and factor in whether rotors are included or must be resurfaced or replaced. Shopping around and checking local taxes and labor rates will help you land the best overall price.