The 2.4-liter Dodge Journey uses 5W-20 engine oil. It can be a synthetic blend or a full synthetic, and the typical oil capacity with filter is about 5 quarts (roughly 4.7 liters).
In practice, this viscosity and these specifications are standard for most 2.4L Journeys sold in the United States and many other markets. Always verify by checking your exact year and model in the owner’s manual or with a dealer, as specifications can vary by year or region.
Recommended oil viscosity and specifications
The following guidelines summarize the most common recommendations for the 2.4 L Dodge Journey. A quick reference helps ensure you pick the right product when shopping.
- Viscosity: 5W-20 (the standard viscosity for this engine in most markets).
- Oil type: Synthetic blend or full synthetic is acceptable.
- Specifications: API SN or newer, with ILSAC GF-5 or equivalent ratings.
- Capacity: Approximately 5 quarts (4.7 liters) with oil filter.
Practically, using 5W-20 oil that meets API SN or newer is the simplest and most common choice. If 5W-20 is unavailable in an emergency, some markets allow a temporary use of 5W-30, but this should be considered a stopgap and you should revert to 5W-20 as soon as possible and follow up with an oil change.
Maintenance notes
Oil quality and change timing depend on driving conditions and oil type. Below are the general guidelines to help you plan maintenance.
Oil change intervals
For conventional mineral oil, oil changes are typically recommended around every 3,000–5,000 miles (4,800–8,000 km), depending on driving conditions. If you use synthetic or synthetic-blend oil, intervals often extend to about 5,000–7,500 miles (8,000–12,000 km) or more, again depending on conditions and vehicle usage. Always follow the interval specified in your owner's manual and consider more frequent changes if you drive in severe conditions (extreme temperatures, heavy towing, or frequent stop-and-go driving).
When in doubt, consult your owner’s manual for the exact year-specific requirements and speak with a Chrysler service representative to confirm the correct oil for your Dodge Journey.
Summary
For a Dodge Journey with a 2.4 L engine, use 5W-20 engine oil, preferably in synthetic blend or full synthetic form, with an approximate capacity of 5 quarts including the filter. Use API SN or newer specifications. Always check the owner’s manual for year-specific guidance and adjust change intervals based on your driving conditions.
What kind of oil does a 2014 Dodge Journey 2.4 L take?
AMSOIL OE 5W-20 100% Synthetic Motor Oil.
Can I put 5W-30 in my Dodge Journey?
6 Liters Of German RAVENOL DXG 5w30 Motor Oil - Meets the Chrysler MS-6395 motor oil quality standard and viscosity required for the 3.6L Dodge Journey gasoline engine.
What kind of oil does a 2018 Dodge Journey 2.4 L take?
The 2.4L inline‑4 typically uses SAE 5W‑20 or the oil grade recommended in the owner's manual; full synthetic is available for improved protection.
Can I use 5W-30 instead of 5W20 in my Dodge?
Using 5W-30 instead can reduce fuel economy and impede flow throughout the engine. While using it temporarily in a pinch likely won't cause your engine lasting harm, remember that the engineers who built your engine did so with a specific viscosity oil in mind, meaning it's best to stick with it.