Most 2017 Honda Fits use halogen headlights for the main beams, though the exact lamp type can vary by trim level and market.
To be certain, consult the owner's manual or inspect the headlight bulb base inside the assembly for the exact bulb code. The following guide outlines how to identify the correct bulb for your specific car and what configurations you might encounter.
How to determine the exact bulb in your 2017 Honda Fit
Use these steps to confirm the precise bulb type for your particular vehicle and trim.
Before starting, note that bulb types can differ by trim and region. The process below helps you verify what your car uses without guessing from photos.
- Check the owner's manual or the door jamb/sticker for the bulb specification listed for low beams, high beams, and fog lights.
- Remove the headlight dust cover (if present) and inspect the base of the bulb in the headlight housing to read the bulb code printed on the bulb or base.
- Compare the observed bulb base with common headlight codes (for example, halogen low-beam bulbs often appear as H11 or similar, while high beams are frequently a separate bulb such as 9005 in many setups). If you see a different code, that is the correct replacement to order.
- If you cannot identify the bulb by sight, contact a Honda dealer or an auto parts store with your VIN or vehicle trim to confirm the exact bulb specification for your car.
These steps will help you identify the exact bulb type for your car and ensure you buy the correct replacement.
Common headlight configurations you might encounter on the 2017 Honda Fit
Because configurations vary by trim and market, here are typical scenarios you might see in the 2017 Fit lineup.
- Low-beam headlight: usually halogen in most configurations, with the exact bulb base depending on trim and region (common options include a halogen low-beam bulb in a projector or reflector housing).
- High-beam headlight: typically a separate halogen bulb, commonly matching the car’s low-beam system in many trims.
- Fog lights: if equipped, these are separate bulbs located in the lower bumper area; the bulb type (for example, H11 or H16) depends on market and trim.
- Special cases: some higher-trim or overseas-market versions may use HID or LED headlights; in those cases, the bulb replacement process and parts differ from standard halogen setups. Always verify with the manual or dealer for your exact configuration.
In practice, your car’s exact bulb type will be indicated on the bulb base inside the housing or in the owner’s manual, so verification is worth the extra minute.
Summary
The 2017 Honda Fit does not have a single universal headlight bulb across all markets and trims. The most common setup is halogen headlights for both low and high beams, with additional fog light bulbs where equipped. To confirm the exact bulb type for your specific vehicle, check the owner’s manual, inspect the bulb base in the headlight housing, or consult a dealer/parts retailer with your VIN. Replacing bulbs in pairs and handling them with care helps ensure consistent light output and safety on the road.