The 2013 Kia Sorento with the 3.5-liter V6 engine generally requires about 6 quarts (roughly 5.7 liters) of engine oil when you replace the filter. This is the typical capacity, though exact amounts can vary slightly by market or service procedure.
When performing an oil change, the total fill refers to engine oil plus the filter. Always confirm the exact specification with the owner's manual or a Kia dealership, since regional differences can apply.
Capacity and oil specifications
Here is a concise breakdown of the engine oil capacity and related specification for the Sorento's 3.5 L V6.
- Oil capacity with filter: 6.0 quarts (5.7 liters).
- Recommended viscosity: typically 5W-20 for most climate conditions; 5W-30 may be used in hotter climates or as directed by the owner's manual.
- Oil grade and standards: API SN or newer, ILSAC GF-6, synthetic or synthetic-blend oils are acceptable as specified by Kia.
Note that actual capacity can vary slightly by production year, market, or engine revision. Always verify with the manual and check the dipstick after filling to reach the correct level.
Oil type and viscosity guidelines
For most 2013 Sorento 3.5 L V6 models sold in North America, Kia recommends 5W-20 oil that meets current API and ILSAC standards. In very hot climates or for certain service conditions, 5W-30 is sometimes permitted. Always rely on the specific specification listed in your vehicle’s owner's manual and consult a dealer if in doubt.
Summary
In summary, plan for roughly 6 quarts (about 5.7 liters) of engine oil with a new filter when changing the oil on a 2013 Kia Sorento 3.5 L V6. Use the viscosity recommended in your manual (commonly 5W-20; 5W-30 per climate), and verify the final fill with the dipstick after running the engine.