The 2016 Honda HR-V with the 1.8-liter i-VTEC engine uses Honda’s OEM oil filter, part number 15410-PLM-A01. This is the standard filter for that engine, paired with Honda’s recommended 0W-20 oil. This article outlines the official part number, how to confirm it for your vehicle, and practical tips for replacing it.
Identifying the correct filter for your HR-V
Because part numbers can vary by region, market, or production revision, it’s important to verify the exact filter using your vehicle’s VIN or a trusted parts lookup tool before purchasing. The information below provides the primary reference and how to confirm it.
- The typical OEM filter for the 2016 HR-V’s 1.8L engine is 15410-PLM-A01.
- Some catalogs may display updated revision codes or regional cross-references; always verify with your VIN or dealer Parts Lookup.
- When in doubt, contact a Honda dealer or use Honda’s official parts lookup to confirm the correct filter for your specific vehicle configuration.
In short, the safest choice for most 2016 HR-Vs is the OEM filter 15410-PLM-A01, but VIN verification ensures you’re using the exact part for your car.
Oil type and maintenance context
Along with the filter, Honda typically recommends 0W-20 engine oil for the HR-V’s 1.8L engine in many regions. The maintenance minder system will indicate the service interval, but a common replacement window is around every 5,000 to 7,500 miles under typical driving conditions when using synthetic oil.
How to replace the oil filter on a 2016 HR-V
Replacing the oil filter is a standard maintenance task that requires an appropriate filter wrench, a drain pan, new oil, and a replacement oil filter. General steps: drain the old oil, remove the old filter, install the new filter (hand-tight, then follow the filter’s guidelines for final torque), refill with fresh oil, and check for leaks.
Dispose of used oil and the old filter at an authorized recycling facility.
Summary
The 2016 Honda HR-V’s 1.8L engine uses Honda OEM oil filter 15410-PLM-A01. Always verify the exact part using your vehicle’s VIN, especially if the car was imported or built for a different market. Pair the correct filter with the recommended 0W-20 oil and follow standard replacement procedures for best engine protection.
Notes
If you need precise cross-references for a specific market or build, consult an authorized Honda dealer or use the official Honda Parts Lookup with your VIN to confirm the exact filter part number.