The cabin air filter in most Infiniti QX60 models sits behind the glove box on the passenger side, inside the HVAC housing. Accessing it requires lowering the glove box and removing a cover to replace the filter.
Location and access
Across most modern QX60 models, the filter is tucked inside the passenger-side portion of the dash, behind the glove box. Accessing it typically involves dropping the glove box and removing a small cover to reach the filter inside the HVAC housing. While the general location remains the same, exact steps can vary slightly by year, so consult your owner's manual if in doubt.
Model-year variations
For Infiniti QX60 models spanning roughly 2013 to the present, the filter generally sits behind the glove box in the HVAC housing. Some years use a small access panel or a removable portion of the glove box area. If you have a very specific model year, checking the manual or a year-specific guide will ensure you follow the correct steps.
Replacement steps
Follow these steps to access and replace the cabin air filter on a typical Infiniti QX60:
- Open the glove box and remove any contents to provide clear access.
- Gently squeeze the sides of the glove box to release the stops and allow it to drop downward.
- Detach the glove box damper arm if your vehicle has one, so the box stays open.
- Look for the rectangular cabin air filter access panel on the HVAC housing near the right side of the glove box area.
- Remove the filter cover by unclipping or unfastening the retaining tabs; pull out the old filter and note the orientation of the arrows on the new filter.
- Insert the new filter with the arrows pointing toward the HVAC system, ensuring it sits flat and fully inserted.
- Reattach the filter cover, reconnect the glove box damper if it was removed, and close the glove box carefully.
Replacing the cabin air filter is a straightforward maintenance task that can improve HVAC performance and interior air quality. If you drive in dusty or polluted areas, consider checking or replacing it more frequently.
Tools and tips
Having a few basic tools on hand can make the replacement smoother:
- Replacement cabin air filter of the correct size for your year/model
- Trim or plastic pry tool to help release panels without scratching
- Small flashlight or smartphone light for better visibility inside the HVAC area
- Gloves to keep hands clean and protect against sharp edges
After replacing, reset any cabin air filter indicators if your QX60 has them, and run the HVAC on a couple of cycles to confirm airflow feels normal and there are no unusual noises.
Summary
The cabin air filter in the INFINITI QX60 is located behind the glove box on the passenger side within the HVAC housing. Replacement involves lowering the glove box, removing the filter access panel, swapping in a correctly oriented filter, and reassembling. Check the manual for your specific year to confirm exact steps and interval recommendations, but a typical replacement cycle is roughly every 12 months or 12,000–20,000 miles, depending on driving conditions.