The cost typically ranges from about $40 to $90 at independent shops, and roughly $70 to $120 at a dealership, depending on oil type, local labor rates, and any add-ons. Most drivers pay around the mid-point of these ranges if they choose a standard synthetic-blend oil.
For context, the 2020 Chevy Trax uses a small four-cylinder engine that requires regular oil changes with a replacement oil filter. Prices vary by region and shop, and the exact amount you’ll pay depends on the oil type you select (conventional, synthetic blend, or full synthetic), as well as any dealership-specific fees or promotions. Below is a practical breakdown to help you plan your budget and compare options.
What affects the price
Several factors influence the final oil-change bill, including where you service the vehicle (dealership vs. independent shop), the oil type chosen, local labor rates, and whether the service is bundled with additional checks or replacements (such as a filter, drain plug, or inspection). The Trax’s small engine and 0W-20 synthetic-motor oil common for many GM vehicles help determine the typical price range.
Here’s a practical guide to typical price ranges by oil type.
- Conventional oil change: Generally the lowest base price, often around $30–$50 at very low-cost shops, but more commonly about $40–$60 with a filter and basic labor.
- Synthetic blend oil change: Commonly $50–$75, with a filter and standard service included.
- Full synthetic oil change: Typically $70–$120, depending on the shop, oil brand, and any included inspections.
Prices can vary widely by region and shop promotions. Always check for local quotes and any online coupons or bundled services before you commit.
What to expect during the service
A standard oil change for the 2020 Trax includes draining the old oil, replacing the oil filter, adding the new oil amount specified for the engine, and performing a quick system check. The service time is usually around 20–40 minutes, depending on the shop’s workflow and whether additional checks are performed.
What’s typically included in the service:
- Replacement of the engine oil with your chosen type and the correct capacity (roughly 4.5–5 quarts for many Trax engines).
- A new oil filter matched to the engine.
- Inspection of fluids and basic systems (coolant, brake fluid, tire pressure, and belts in many quick-service visits).
- Battery and cabin systems check may be offered as part of a package or dealership service.
In some cases, dealers may perform a more thorough multipoint inspection as part of a maintenance visit, which can affect the overall price but provide added value.
How to shop for the best price
To get the best value, compare local quotes from independent shops and dealerships, ask about the exact oil type (0W-20 synthetic is common for modern GM engines), and verify what the price includes (filter, disposal fees, taxes, and any required inspections). Look for coupons, maintenance packages, and loyalty programs, and consider whether you prefer a dealership’s OEM-approved service or a trusted independent shop with a solid reputation.
Summary
For a 2020 Chevy Trax, plan for roughly $40–$90 at an independent shop and $70–$120 at a dealership, depending on oil type and local rates. The engine’s oil capacity is around 4.5–5 quarts with a filter, and most services take about 20–40 minutes. By comparing quotes and asking about included services, you can find a price that fits your budget while keeping the Trax’s engine properly lubricated.