A replacement catalytic converter for a 2013 Jeep Compass typically costs about $150–$1,000 for the part itself, with installed totals usually ranging from roughly $400–$2,000 depending on OEM vs aftermarket parts, how many converters are involved, and local labor rates.
In more detail, catalytic converters are a critical part of the exhaust and emissions system. The exact price depends on the engine variant (2.0L vs 2.4L), whether there is one or two converters in your model’s exhaust, the brand and type of the part (OEM vs aftermarket), and the labor costs in your area. Availability of CARB-compliant parts can also influence price, especially in states with strict emissions rules.
What affects the price
The cost you see for a catalytic converter replacement is driven by several factors. The list below explains the main elements that determine the final bill.
- Part type: aftermarket/Direct-fit vs OEM vs universal replacement; aftermarket parts are typically cheaper but may vary in fitment and warranty.
- Number of converters: Some 2013 Jeep Compass configurations use a single converter, while others may have a second unit (pre-cat or downstream) that needs replacement.
- Engine variant: The 2013 Compass offered different engines (e.g., 2.0L and 2.4L); the number and placement of catalysts can differ by engine, affecting price.
- CARB compliance: California and some other states require CARB-compliant parts, which can cost more than non-CARB options.
- Labor costs: Shop rate and the estimated time to access and replace the cat(s) vary by location and vehicle accessibility.
Conclusion: Prices vary widely based on these factors; for a precise quote, check with several shops or part retailers for your exact engine and configuration.
Typical price ranges (parts and labor)
Prices below reflect common ranges for parts and labor in the United States as of 2024–2026 and will vary by region and vehicle condition. Use them as a baseline when requesting quotes.
- Parts (cat converter): aftermarket/direct-fit typically $100–$400; OEM Chrysler/Jeep replacement parts commonly $500–$1,000; premium/high-flow or CARB-compliant parts may run $700–$1,200+
- Labor: generally $100–$300 depending on shop rate and job complexity (more if access is difficult or two converters are involved)
- Installed total: for a single converter, expect roughly $400–$1,300; if your vehicle requires two converters, total may range from about $1,000–$2,500+
Conclusion: A reasonable installed price for a single converter typically falls in the mid hundreds to low thousands, with higher totals if OEM parts, dual converters, or CARB-compliant options are chosen. Always obtain a written estimate before work begins.
Where to buy and how to save
Beyond a local shop’s labor estimate, consider these options to manage costs without compromising fitment or reliability.
- OEM vs aftermarket: OEM parts are usually more expensive but may offer perfect fit and warranty; reputable aftermarket brands can offer substantial savings.
- National auto parts retailers: AutoZone, Advance Auto Parts, O'Reilly often stock direct-fit catalytic converters and can price-match or ship quickly.
- Independent exhaust shops: They can provide competitive labor rates and may offer a lifetime warranty on the installation.
- Salvage yards or recycled parts: Cheaper, but reliability and CARB compliance can vary; check part condition and legality for street use.
Conclusion: Shop around for part numbers that match your exact engine and VIN, compare both parts and labor quotes, and verify warranty terms and CARB compliance where required.
What to ask your shop
To avoid surprises, prepare these questions when you request a quote or visit for service.
- Is the quote for OEM or aftermarket parts, and is it CARB-compliant if required in your state?
- Does the job require one or two converters, and what is the estimated labor time?
- Are O2 sensors, studs, gaskets, or hardware included in the price, and is there a diagnostic fee?
- What is the warranty on the part and on the labor, and what conditions void the warranty?
Conclusion: A clear, itemized quote helps you compare options and avoid unexpected charges when the work is completed.
Summary
For a 2013 Jeep Compass, catalytic converter pricing varies widely based on engine configuration, whether one or two converters are involved, and your choice of OEM versus aftermarket parts. Part costs can range from roughly $100–$1,000, with installed totals typically in the $400–$2,000 range, depending on labor rates and regional factors. Always obtain multiple, detailed quotes and verify CARB compliance if you live in a state with stringent emissions requirements. Consider reputable shops and verify warranties to balance cost, fit, and reliability.
Note: This article provides general pricing guidance. For a precise figure, contact local repair shops or auto parts retailers with your exact vehicle details (year, engine, VIN) and preferred part type.