The 2016 Honda Odyssey's 3.5-liter V6 engine requires about 5.7 quarts of engine oil for a full oil change with a new filter; without replacing the filter, it uses roughly 5.1 quarts.
The question centers on the official oil capacity for the 2016 Odyssey and how much oil to add during routine service. Capacities can vary slightly depending on whether the filter is replaced and on the oil type used, so the figures below reflect standard Honda specifications for this model year.
Oil capacity details
Honda specifies the engine oil capacity for the 2016 Odyssey as follows for a complete change, using a new filter. The values are given in quarts and liters (with filter):
- With a new oil filter: 5.7 quarts (5.4 liters).
- Without replacing the filter: about 5.1 quarts (4.8-4.9 liters).
Note: Always verify with the vehicle's owner manual or your dealer to account for variations due to market, engine variant, or oil filter type.
Maintenance tips
When performing an oil change, use the recommended viscosity for your region and the engine model, and replace the filter. After adding oil, check the dipstick with the engine off and on level ground, and top off to the full mark if needed. Dispose of used oil responsibly.
Summary
The 2016 Honda Odyssey uses about 5.7 quarts of engine oil when changing the oil with a new filter; if you do not replace the filter, it’s approximately 5.1 quarts. Always consult the owner's manual for your exact vehicle configuration and follow proper servicing procedures.


