The 2016 Honda Fit uses 0W-20 synthetic oil, meeting API SN or newer standards, typically Honda Genuine 0W-20 or an equivalent that complies with Honda specifications. Always confirm the exact requirement in your owner's manual for your market.
Oil Type and Specifications
This section summarizes the official guidance for choosing the right oil for the Fit’s 1.5-liter engine and how to apply it in daily maintenance.
- Viscosity: 0W-20
- Oil type: Full synthetic oil (0W-20 grade)
- Certification: API SN or newer (ILSAC GF-6-compatible oils are generally acceptable)
- Source: Honda Genuine 0W-20 or an equivalent that explicitly meets Honda specifications
Bottom line: Use a high-quality 0W-20 synthetic oil that meets API SN or newer standards and follows Honda’s specifications for your region. Avoid thicker oils unless the manual explicitly allows them.
Oil Change Interval and Maintenance Schedule
Before listing the suggested intervals, here is a practical overview of how often you should service the oil in a 2016 Fit under typical conditions.
- Normal driving: oil changes every 7,500 miles (12,000 km) or as recommended by the vehicle’s maintenance minder
- Severe driving: oil changes every 3,750 miles (6,000 km) when conditions are considered severe (extreme temperatures, frequent short trips, heavy city driving, towing, etc.)
- Additional notes: always replace the oil filter at each change and ensure the oil volume is checked and topped up to the correct level if needed
In practice, most owners will follow a 7,500-mile interval with 0W-20 synthetic oil, adjusting for climate and driving habits as indicated by the maintenance minder or local guidelines.
Regional Variations
Oil specifications can vary by market. While North America commonly specifies 0W-20 synthetic oil for the 1.5L Fit, some regions may have similar requirements or provide slightly different acceptable grades. Always consult the local owner's manual or a Honda dealer to confirm the exact specification for your market.
North America
In the United States and Canada, the 2016 Fit generally calls for 0W-20 synthetic oil, with API SN or newer certification and Honda’s recommended service intervals.
Other Markets
In other regions, the same 0W-20 viscosity is often preferred, but always verify the exact grade and specifications in the local manual or with a dealer, as formulations and climate considerations can influence the recommended oil.
Summary
For a 2016 Honda Fit, the recommended oil is a 0W-20 synthetic that meets API SN or newer standards (typically Honda Genuine 0W-20 or equivalent). Use the maintenance minder to guide oil-change intervals, usually about every 7,500 miles under normal conditions and more frequently under severe conditions. Always follow the owner’s manual for your specific market and climate, and verify any regional variations with a dealer.