Skip to Content
103 State St East Jordan, MI, 49727
  • MON: Closed
  • TUES: 8:00AM - 6:00PM
  • WED: 8:00AM - 6:00PM
  • THUR: 8:00AM - 6:00PM
  • FRI: 8:00AM - 6:00PM
  • SAT: Closed
  • SUN: Closed
MORE >
  • Yelp
  • Google Business Profile
  • Facebook
7984 North St Central Lake, MI, 49622
  • MON: 8:00AM - 6:00PM
  • TUES: 8:00AM - 6:00PM
  • WED: 8:00AM - 6:00PM
  • THUR: 8:00AM - 6:00PM
  • FRI: Closed
  • SAT: Closed
  • SUN: Closed
MORE >
  • Yelp
  • Google Business Profile
  • Facebook

Where is the oil filter on a 2004 Chevy Silverado 2500 HD?

On a 2004 Chevy Silverado 2500 HD, the oil filter location varies by engine. For the gasoline 6.0L Vortec engine, it sits on the passenger side of the engine block; for the Duramax diesel option, the filter is mounted on the driver’s side toward the front of the engine. Knowing which powertrain your truck has will point you to the right spot.


Different engine configurations mean different filter placements. This article outlines the typical locations and how to access them safely when performing an oil change or filter replacement.


Engine options and oil filter locations


Gasoline engines — 6.0L Vortec V8


For the 2004 Silverado 2500HD equipped with the 6.0L Vortec gas engine, the oil filter is mounted on the passenger side of the engine block. It is generally found toward the front half of the engine, near the oil pan, and is accessible from the right-side wheel well once the hood is open. The filter itself is a standard spin-on unit that you loosen counterclockwise with a filter wrench and replace with a new gasket-sealed filter.


Duramax diesel engines — 6.6L LB7/LLY (2004)


In the Duramax-powered 2004 Silverado 2500HD, the oil filter is located on the driver’s side of the engine, near the front of the block. It is a spin-on canister similar in style to the gasoline engine filter but situated along the left side of the engine. Access may be from the front or underneath the vehicle, and it’s wise to have a catch pan ready for the oil release during removal and replacement.


Tips for changing the oil filter


Before starting, ensure the engine is cool, gather the correct filter size and oil type, and have a drain pan, gloves, and rags on hand. If you’re changing the filter yourself, remember to lubricate the new filter gasket with a touch of clean oil before installation and to tighten it according to the manufacturer’s specification after the old oil has drained.


Summary


The oil filter location on a 2004 Chevy Silverado 2500 HD depends on the engine: passenger-side for the 6.0L Vortec gasoline engine and driver-side for the Duramax diesel. Confirm your engine type to locate the filter quickly, and follow standard safety practices during oil changes. If you’re unsure of your exact configuration, consult the owner’s manual or a service professional for guidance.

Related Articles

Ryan's Auto Care

Ryan's Auto Care - East Jordan 103 State St East Jordan, MI 49727 231-222-2199
Ryan's Auto Care - Central Lake 7984 North St Central Lake, MI 49622 231-544-9894

Ask any car or truck owner in Central Michigan who they recommend. Chances are they will tell you Ryan's Auto Care.