The Versa typically uses a standard 12-volt lead-acid battery, with Group 35 being the most common size across many model years. However, the exact group size can vary by year, engine, and trim, so always verify for your specific vehicle.
The Versa has spanned several generations and configurations, including earlier Versa sedans, the Versa Note, and current versions. Electrical requirements and space constraints change over time, which means the recommended battery group size may differ from one model year to another. To ensure a perfect fit and reliable starts, check the battery label, the owner's manual, or use Nissan’s parts lookup by VIN for your exact car.
Common group sizes you may encounter
Below are the sizes you’re most likely to see when replacing a Versa battery, along with notes about when they tend to appear.
- Group 35 — the most common size for many Versa configurations. Fits a wide range of layouts and provides adequate starting power for typical climates.
- Group 24F — used in some Versa variants or climates where a slightly larger, higher-capacity battery is preferred.
- Other sizes (less common) — on rare occasions, some trims or special editions may use alternative sizes, but Group 35 and 24F are by far the most typical for Versa models.
Concluding: Always verify the exact group size by checking the current battery label, the owner's manual, or a VIN-based parts lookup to ensure proper fit and performance before purchasing.
Group 35 details
Group 35 is a widely used compact car battery size. It generally provides ample CCA (cold-cranking amps) for standard Versa engines in temperate climates, with a fit that matches common battery trays and terminal configurations found in many Versa generations.
Group 24F details
Group 24F offers a larger footprint and higher capacity options. It may be chosen for vehicles in colder climates or for owners wanting a battery with a higher reserve capacity, but it must still fit the Versa’s tray and terminal layout.
Other sizes notes
While Group 35 and 24F cover the majority of Versa replacements, very early or late production runs could deviate. Always confirm with a VIN lookup or the dealer to avoid a misfit battery.
How to verify the correct battery size for your Versa
To avoid guessing, use these quick verification steps before buying a replacement:
- Read the current battery’s Group Size code stamped on the label (for example, 35 or 24F).
- Check the Versa’s owner’s manual or service manual for the recommended group size.
- Enter your VIN on Nissan’s official parts site or a trusted retailer to retrieve the exact group size for your vehicle.
- Consult a dealership or auto parts store with your year, engine, and trim to confirm fitment.
Concluding: Verifying the correct group size ensures proper fit, terminal orientation, and starting performance, and helps you select a battery with appropriate CCA and RC ratings for your climate and usage.
Battery specs and replacement considerations
Beyond group size, consider climate-related performance and capacity metrics. Versa batteries are 12-volt lead-acid units, with CCA requirements typically ranging from a few hundred to over 600 depending on the engine and climate, and capacity (Ah) often in the 40–60 Ah range. Reserve capacity (RC) should be chosen to meet longer idle times or cold-start demands.
Bottom line: The Nissan Versa uses a standard 12V lead-acid battery; the most common group size is 35, but verify for your exact year and engine. When replacing, always confirm compatibility with the current setup via the battery label, manual, or VIN-based lookup.
Summary: For Versa owners, the essential step is to confirm the correct group size for your specific model year and engine. In most cases you’ll encounter Group 35, with Group 24F as a common alternative; always validate dimensions, terminal layout, and CCA/RC ratings to ensure reliable performance.