The gas/fuel door is released from inside the car on the driver’s side, usually via a small lever near the left footwell or, in some years, a dash-mounted button.
This article explains where to look inside the cabin, how to release the door, and the steps to refuel, noting year-to-year variations across markets for the Honda Fit (also known as the Honda Jazz in some regions).
Inside the cabin: locating the release
Most Honda Fits place the release control close to the driver so you can open the door without exiting the vehicle. The exact control can vary by year and trim.
Common locations by year
Here are the typical placements you’ll encounter:
- Floor-mounted lever on the driver’s side, toward the left footwell or door sill. It is usually labeled with a fuel pump icon and is pulled toward you to pop the fuel door.
- Dash-mounted button on the lower left side of the steering column in some trims or markets; press to release the door.
If you can’t find either control, consult your owner’s manual for your exact year and trim, or check for a label inside the fuel door or on the lid itself.
Outside the car: opening the fuel door and refueling
Once the interior release has popped the door, the exterior steps are straightforward and consistent across most Fit models.
- Walk to the side where the fuel door is located and open the door by pressing on its edge or, in some cases, pulling a small latch near the edge.
- Remove the fuel cap by turning it counterclockwise; place the cap on the holder on the door if provided.
- Refuel with the nozzle, then replace the cap and close the door, ensuring the latch engages.
After refueling, the door should latch securely. If it feels loose or won’t latch, double-check that the cap is tightened and the door is fully closed.
Summary
For a Honda Fit, the gas door is typically released from inside the car on the driver’s side via a floor lever or a dash-mounted button, depending on the model year and market. If you’re unsure, check the owner’s manual for your specific year and trim. After releasing the interior control, open the exterior fuel door, remove and replace the cap as you refuel, then close everything securely and continue your drive.