Brake pad sets for a 2009 Honda CR-V typically cost about $40–$120 per axle for parts, with front pads generally at the higher end. Labor to install at a shop usually adds about $80–$150 per axle. This article explains the typical price ranges, what affects them, and how to shop for the best option.
Typical price ranges by axle and material
Prices vary by brand, material, and where you buy. The ranges below reflect common aftermarket pricing in the United States for a 2009 CR‑V as of 2024–2025. Note that some CR‑V configurations may use rear drum brakes; if so, you won't be buying brake pads for the rear and would instead purchase drum brake shoes.
- Front brake pad sets: typically $40–$120 per axle, depending on material
- Budget/organic or semi-metallic: roughly $40–$70
- Mid-range or performance semi-metallic: roughly $70–$100
- Ceramic or premium: roughly $90–$120
- Rear brake pad sets: typically $30–$100 per axle, depending on material
- Budget/organic or semi-metallic: roughly $30–$60
- Mid-range: roughly $50–$80
- Ceramic or premium: roughly $70–$100
Prices can vary by retailer, market, and whether you buy OEM or aftermarket parts. If you replace both axles, multiply the per-axle cost by two and factor in potential taxes, shipping, and any core charges. Some pads include wear sensors; if yours require sensors, that can affect price.
Other costs to consider
Beyond the pads themselves, you may encounter additional costs that affect the total replacement price.
- Rotors: resurfacing or replacement can add to the cost. Resurfacing is cheaper per rotor than replacement, but many shops recommend or require rotor replacement if thinning is excessive.
- Rotors or hardware: new rotors (if needed) plus anti-rattle clips and other hardware can add $20–$60 per rotor or more, depending on quality.
- Labor: installation fees typically range from about $80–$150 per axle at a typical shop, depending on location and whether rotor work is needed.
- Wear sensors and brake fluid: some pad kits include wear-sensor hardware; a fluid flush or bleed is optional but may be recommended in some maintenance scenarios, adding $60–$100.
When budgeting, ask for a written estimate that separates parts, labor, rotor costs, and any additional fees. This helps you compare quotes accurately across shops or retailers.
DIY vs professional installation
Choosing between doing it yourself or having a shop install the pads affects both cost and risk. Here are the considerations.
- DIY: You’ll save on labor but need the right tools (jack stands, lug wrench, caliper tool or C-clamp, torque wrench) and knowledge of proper bedding-in procedures. Expect the job to take a couple of hours per axle if you’re careful.
- Professional: A shop provides warranty coverage on parts and workmanship and ensures correct torque and bedding-in, which can affect pad life and performance. Typical turnaround is a few hours, depending on parts in stock and rotor work needed.
Whether you DIY or go pro depends on your comfort with automobile maintenance, access to tools, and how quickly you need the job done. Always follow safety precautions when lifting a vehicle and handling brake components.
Where to buy brake pads for a 2009 CR-V
Shopping options vary by price, convenience, and return policies. Here are common sources.
- Auto parts stores (in-store or online): AutoZone, Advance Auto Parts, O'Reilly, NAPA, etc.
- Online retailers and marketplaces: RockAuto, Amazon, PartsGeek, eBay Motors, etc.
- OEM or dealer parts: Honda parts department for genuine Honda pads (often pricier, but guaranteed fit and compatibility).
Compare part numbers to ensure correct fit for your specific CR‑V trim and whether a wear sensor kit is included or required. Reading user reviews and cross-referencing your VIN can help verify compatibility.
Summary
For a 2009 Honda CR-V, plan on roughly $40–$120 per axle for brake pad parts, with front pads typically at the higher end of the range and rear pads at the lower end. Labor adds about $80–$150 per axle at a shop, and total cost rises if you replace rotors or hardware. Prices vary by brand, material, region, and whether you buy OEM or aftermarket parts. When in doubt, obtain multiple written estimates and confirm what is included in each quote.