Skip to Content
103 State St East Jordan, MI, 49727
  • MON: Closed
  • TUES: 8:00AM - 6:00PM
  • WED: 8:00AM - 6:00PM
  • THUR: 8:00AM - 6:00PM
  • FRI: 8:00AM - 6:00PM
  • SAT: Closed
  • SUN: Closed
MORE >
  • Yelp
  • Google Business Profile
  • Facebook
7984 North St Central Lake, MI, 49622
  • MON: 8:00AM - 6:00PM
  • TUES: 8:00AM - 6:00PM
  • WED: 8:00AM - 6:00PM
  • THUR: 8:00AM - 6:00PM
  • FRI: Closed
  • SAT: Closed
  • SUN: Closed
MORE >
  • Yelp
  • Google Business Profile
  • Facebook

What type of oil does a 2010 Ford Fusion Hybrid take?

The 2010 Ford Fusion Hybrid uses SAE 5W-20 motor oil, typically Motorcraft 5W-20 or an equivalent that meets API SN (or newer). The oil capacity with a filter change is about 4.5 quarts.


Oil specification and recommended practice


For the Fusion Hybrid’s 2.5-liter Atkinson-cycle engine, Ford specifies a lightweight oil to support cold starts, efficiency, and emissions. You can use conventional, synthetic blend, or full synthetic oil, as long as it meets API SN or newer and ILSAC GF-5 specifications. Motorcraft 5W-20 is a common, approved option, though other brands that meet the same specs are acceptable.


Key details to know about the oil


Use these guidelines to ensure you select the right oil:



  • Viscosity: SAE 5W-20 for all temperature ranges in typical conditions for this model

  • Specification: API SN (or newer) and ILSAC GF-5; Ford-listed equivalents are acceptable

  • Oil type: Conventional, synthetic blend, or full synthetic – as long as it meets the above specs

  • Recommended brand: Ford Motorcraft 5W-20 or any brand meeting the same specifications

  • Oil capacity: Approximately 4.5 quarts with a filter change


Always verify the exact specification in the owner's manual or with a Ford dealership, since regional guidelines or updates may apply.


Why the right oil matters in a hybrid


Hybrid powertrains depend on precise lubrication to keep the gasoline engine and electric-drive components running smoothly. Using the correct 5W-20 oil helps ensure reliable cold-weather starts, fuel efficiency, and optimal emissions performance. Regular oil changes with the proper oil type protect the engine and the hybrid system over the vehicle’s lifetime.


Summary


For a 2010 Ford Fusion Hybrid, use SAE 5W-20 motor oil in conventional, synthetic blend, or full synthetic form, as long as the oil meets API SN (or newer) and ILSAC GF-5 specifications. The typical oil capacity is about 4.5 quarts with a filter, and Motorcraft 5W-20 is a commonly recommended option. Always consult the owner's manual or a dealer for the exact specification and service interval.

Ryan's Auto Care

Ryan's Auto Care - East Jordan 103 State St East Jordan, MI 49727 231-222-2199
Ryan's Auto Care - Central Lake 7984 North St Central Lake, MI 49622 231-544-9894

Ask any car or truck owner in Central Michigan who they recommend. Chances are they will tell you Ryan's Auto Care.