The 2009 Honda Fit uses 26-inch driver-side and 16-inch passenger-side front wiper blades, plus a 12-inch rear blade. This combination is standard for most North American models of that year.
For readers looking to replace their blades, this article breaks down the exact sizes for the Fit’s front and rear wipers, notes any regional variations, and provides tips on selecting and installing replacements.
Front wiper blade sizes
Front blades are paired in a longer driver-side and a shorter passenger-side to accommodate the windshield’s sweep and visibility needs.
- Driver-side front blade: 26 inches
- Passenger-side front blade: 16 inches
When shopping, ensure the blades fit the Fit’s wiper arm attachments (hook, pin, or side-lock) and your preferred brand’s mounting style. Measurements above reflect the standard 2009 model; verify if your exact VIN has any variation.
Rear wiper blade size
The rear window uses a single, shorter blade, typical for hatchback designs like the Fit.
- Rear wiper blade: 12 inches
Rear blade replacement is generally straightforward: remove the old blade by releasing the connector and slide in the new one, ensuring a snug fit and proper clearance for the hatch window.
How to replace wiper blades (quick guide)
Replacement steps are similar across front blade styles, with brand-specific steps noted on packaging. The general steps are:
- Lift the wiper arm away from the glass until it stays raised.
- Press the release tab on the blade connector and remove the old blade.
- Attach the new blade by sliding it into the connector until it clicks, then lower the arm back to the windshield.
Always test the new blades for full coverage and edge-to-edge contact, and consult the owner's manual or manufacturer’s site if you encounter a non-standard blade or arm.
Where to buy and how to choose
Options range from dealer OE replacements to aftermarket blades. Consider climate, driving conditions, and maintenance habits when choosing blade material (rubber vs. silicone) and design (traditional frame vs. beam).
- OE replacement blades for the 2009 Fit: 26" driver, 16" passenger; 12" rear.
- Common aftermarket options: various 26" and 16" front blades; 12" rear blade variants.
- Tips for selection: check adapter compatibility and warranty, and consider silicone blades for longer life in hot/cold climates.
Having the right sizes ensures proper windshield contact and consistent wipe quality, especially during heavy rain or snow showers.
Summary
In summary, the 2009 Honda Fit takes a 26-inch driver-side front blade, a 16-inch passenger-side front blade, and a 12-inch rear blade. Verify the blade type and attachment method for your specific vehicle and region, and consult the owner's manual or dealer for exact fitment if in doubt.