Inflate all tires to the recommended cold pressures and reset the TPMS via automatic relearn or, if your model supports it, a manual calibration in the vehicle’s settings. Exact steps can vary by year and trim, so check your owner’s manual for model-specific instructions.
Understanding what the TPMS light means
The Tire Pressure Monitoring System (TPMS) light comes on when the system detects low tire pressure or a sensor issue. In the Honda HR-V, heat, temperature changes, punctures, or recently changed tires can trigger the warning. A proper reset ensures the system correctly tracks tire pressures after adjustments or replacements.
Automatic relearn method (common across many HR-V models)
Most HR-Vs require a straightforward auto relearn after you’ve corrected tire pressures. Here is the typical sequence you’ll follow:
- Check all tires with a reliable gauge and inflate to the recommended cold pressure listed on the driver’s door jamb placard or in the owner’s manual.
- Do not exceed the recommended pressure; adjust as needed.
- Drive on a highway at speeds above 50 mph (80 km/h) for about 10 minutes to allow the system to relearn each tire’s position and pressure.
- After the drive, stop, turn off the engine, and resume normal driving to confirm the light stays off.
If the light stays on after this process, a more specific reset or a sensor issue may be involved, and you should consult the manual or a technician.
Manual TPMS reset via the vehicle's settings (models that support it)
Some HR-V configurations offer a manual TPMS reset or calibration option in the vehicle’s information display or settings menu. This can bypass the need for a long highway relearn, but availability varies by year and trim.
Model-year variability
Where available, you might find the option under Settings or Vehicle > TPMS Calibration/Reset. The exact path and wording can differ, so refer to your manual or a dealer for guidance.
- Turn the ignition to ON with the engine off and access the vehicle’s settings display.
- Select the TPMS or Tire Pressure Calibration option and confirm Reset/Calibrate.
- Wait for the calibration to complete, then drive briefly to verify the warning light turns off.
Not all trims offer this feature. If you can’t locate the option, rely on the automatic relearn method or seek professional assistance for sensor issues or leaks.
What to do if the light stays on after trying resets
A persistent TPMS light may indicate a slow leak, a damaged sensor, or a faulty wheel that needs attention. Inspect tires for punctures, check valve stems, and verify sensor integrity. If the light remains on after following the appropriate reset steps, schedule service at a Honda dealer or a qualified tire shop to diagnose a faulty sensor or perform sensor replacement and programming.
Summary
Resetting the tire pressure light on a Honda HR-V usually involves inflating all tires to the recommended cold pressures and then triggering a TPMS relearn. For many models, driving on highways at highway speeds completes the automatic relearn; some trims also offer a manual TPMS calibration in the vehicle’s settings. Procedures can vary by year and trim, so always consult the owner’s manual for your exact model. If issues persist, seek professional diagnostics to rule out sensor or tire problems.