The Honda Accord typically has two main fuse boxes: one in the engine compartment under the hood and one inside the cabin on the driver's side under the dash. Some trims or configurations may have an additional fuse box, but these two locations cover the vast majority of models from recent generations.
In this article, we outline where to look for the fuse boxes on most Accord models, how to access them, how to read the diagrams, and practical tips for inspecting or replacing fuses safely.
Engine compartment fuse box
The primary fuse box for the engine bay is located in the engine compartment on the driver's side of the vehicle. It is a black plastic module with a removable lid that includes a diagram mapping fuse numbers to circuits.
To access and inspect the engine compartment fuse box, follow these steps:
- Park the car on a level surface, switch off the engine, and set the parking brake. Open the hood and locate the fuse box—typically a black plastic box near the front left side of the engine bay.
- Release any clips or latches and lift the lid to reveal the fuses and relays. The inside of the lid contains a diagram identifying each fuse and its function.
- If you suspect a blown fuse, pull it straight out with a fuse puller or small pliers to inspect the metal element inside. If the element is broken, the fuse is blown.
- Replace a blown fuse with another fuse of the same amperage rating shown on the diagram. Do not use a higher rating to compensate for a fault.
- Reinstall the fuse, reseal the lid, and close the hood. Start the car and test the affected circuit.
In most cases, issues tied to a blown engine compartment fuse will resolve after replacing the fuse. If a fuse keeps blowing, there may be a deeper electrical problem that warrants professional service.
Interior cabin fuse box
The interior fuse box is located inside the cabin, on the driver's side under the dash. Access usually requires removing a small cover or panel near the left knee area to reveal the fuse board and its diagram.
To access and inspect the interior cabin fuse box, use these steps:
- Park the car and turn off the engine. Sit in the driver’s seat and locate the access panel under the left side of the dashboard near the knee area.
- Remove the panel or cover to expose the fuse box, then check the lid or panel diagram for fuse designations corresponding to interior circuits (like lights, power windows, infotainment, and accessories).
- Use a fuse puller or small pliers to remove a suspect fuse and inspect the metal element inside for a break or visible burn.
- Install a replacement fuse with the same amperage rating shown on the diagram. Do not exceed the rating to avoid wiring damage.
- Reattach the panel and test the affected interior components to confirm the issue is resolved.
Not all Accords will exhibit the same layout in the cabin; if the fuse you’re checking isn’t in the expected box, consult the owner’s manual for your exact model year and trim to confirm the correct fuse box location.
Reading the fuse diagrams and safety tips
The fuse diagrams on both boxes provide the amperage rating and the circuit each fuse protects. Always replace a blown fuse with the same rating and ensure you reconnect the lid securely to protect the circuits.
When handling fuses, take these safety precautions: disconnect the ignition when replacing fuses, avoid contact with hot engine components, and never bypass a fuse with a wire or conductor to workaround a fault.
What to do if a fuse keeps blowing
If you replace a fuse and it blows again, do not continue replacing fuses in quick succession. A recurring blow indicates an electrical fault that should be diagnosed by a professional technician to prevent wiring damage or potential fire risks.
Other possible locations
In rare configurations or hybrid variants, there may be additional fuse boxes or specialized relays located in other areas of the vehicle. Always refer to the exact owner’s manual for your model year to confirm any additional fuse locations and circuit mappings.
Summary
For most Honda Accord models, you’ll find fuse boxes in two places: under the hood in the engine compartment and inside the cabin on the driver's side under the dash. Each box has a diagram on the lid that shows which fuse protects which circuit. To inspect or replace a fuse, power off the vehicle, remove the lid, identify the correct fuse, and replace it with a fuse of the same amperage. If fuses repeatedly blow, seek professional assistance to diagnose underlying electrical problems.
Where is the fuse box in a 2017 Honda Accord?
If you know more comment below but I think that's it for this car. So if you look under the steering wheel. And you go here. I need some light there's your fuses.
Where is the fuse box located in a Honda Accord?
Side then go in the front of the vehicle. Open the hood. And the second fuse box will be on your right side right in the back. Here usually you have the battery. Now it has been removed.
Where is the Honda fuse box?
All you need is pop it up. And there we go there is the next fuse box. And it got some fuses and lies. Again on the back of the cover. You will find the diagram.
What's the best oil to put in a Honda Accord?
Information
| Accord | 2003-2010 L4 & V6: 5W-20 (S/UFS), topped off with 0W-20 (UFS) 2011-2020 L4 & V6: 0W-20 (UFS) 2005-2007 Hybrid: 5W-20 (S/UFS) 2014-2020 Hybrid or Plug-in: 0W-20 (UFS) |
|---|---|
| Fit | 2007-2010: 5W-20 (S/UFS), topped off with 0W-20 (UFS) 2011-2017: 0W-20 (UFS) 2019: 0W-16 (UFS), topped off with 0W-20 (UFS) |


