The fuel pump on a Chrysler 200 is located inside the fuel tank (an in-tank pump). Access for servicing is typically via an interior panel under the rear seat cushion, not from the exterior or under the hood.
Overview of the Chrysler 200 fuel-pump layout
In the Chrysler 200, the fuel pump is integrated with the fuel sending unit inside the tank. This design helps ensure proper cooling and consistent fuel pressure to the engine. The pump is not mounted in the trunk or under the hood; instead, service access is provided from inside the vehicle.
Where to access the pump on a Chrysler 200
The exact access point can vary by year and trim, but most 2011–2017 Chrysler 200 models use an interior access method. To reach the pump, you typically remove the rear seat bottom cushion and locate a service panel or plug in the floor behind the rear seats. Removing this cover reveals the fuel pump and sending unit inside the tank. Some variants or markets may use a trunk-floor access panel instead; always verify with the owner's manual or a service manual for your exact vehicle.
Before attempting any work, make sure the vehicle is safely parked, the fuel system is depressurized, and you have the proper tools and safety precautions. If you’re unsure about the process, have a professional perform the replacement.
Access-method options (at a glance)
These are the common ways technicians gain access to the in-tank pump on the Chrysler 200. The exact method depends on year, trim, and market, so consult your manual for the precise procedure.
- Rear seat cushion access: Remove the rear seat bottom cushion to locate and lift out the floor-panel cover or plug that hides the pump access point.
- Trunk/floor access (less common): Some configurations may use a panel in the trunk floor or spare-well area to reach the pump without removing the rear seat.
After the pump work is complete, reinstall all panels and cushions securely, and check for any leaks or fuel odors. If in doubt, seek professional help to avoid safety hazards.
Safety and maintenance notes
Working on the fuel system requires caution: relieve fuel pressure, disconnect the negative battery, work in a well-ventilated area away from sparks, and dispose of fuel-soaked materials properly. Use OEM replacement parts when available and follow the vehicle’s service manual instructions closely.
Summary
The Chrysler 200 uses an in-tank fuel pump inside the fuel tank. Access for service is typically gained from inside the vehicle, most commonly by removing the rear seat cushion to reach an access panel or plug in the floor behind the rear seats. Some variations may offer trunk-floor access. For your exact model year and trim, consult the owner's manual or a repair manual to confirm the correct access point and procedure.