The correct oil filter for a 2017 Honda Accord depends on the engine under the hood. The Accord offered two engines that year—the 2.4-liter four-cylinder and the 3.5-liter V6—each using a different filter. In most cases, the OEM parts are among Honda Genuine filters, with different part numbers for each engine. Verify against your vehicle’s VIN or owner’s manual to be sure.
Engine options and their filters
Two engines were available in the 2017 Honda Accord, and each engine uses its own oil filter part number. The following outlines the commonly cited OEM part numbers associated with these engines.
- 2.4L four-cylinder engine (engine code typically K24W): Honda Genuine oil filter part number 15400-PLM-A01.
- 3.5L V6 engine (engine code typically J35): Honda Genuine oil filter part number 15400-RAA-003.
Bottom line: there are two primary OEM filters for the 2017 Accord, one for the 2.4L and one for the 3.5L. Always confirm with your VIN or a trusted parts catalog to avoid a mismatch.
OEM vs. aftermarket options
When choosing where to buy, you have two broad paths: stay with Honda Genuine parts for a guaranteed fit, or opt for a reputable aftermarket filter that cross-references correctly to Honda’s specs.
- Honda Genuine filters: Designed specifically for Honda models, ensuring a precise fit and gasket seal.
- Aftermarket cross-reference options: Reputable brands such as Bosch, Wix, Purolator, and Mann offer filters that cross-reference to Honda specifications. Always verify the exact cross-reference against the engine and year to ensure compatibility.
Ultimately, either route can work well, provided you select the correct part number for your engine and model year. If in doubt, consult the dealership parts desk or use an online parts database with your VIN to confirm.
How to verify the correct filter for your car
Use these steps to ensure you select the right oil filter for your specific 2017 Accord configuration.
- Check the owner’s manual or service manual for the recommended oil filter part number corresponding to your engine.
- Look under the hood for the engine code or sticker that sometimes lists compatible parts.
- Use your VIN on an official Honda parts catalog or trusted retailer site to pull the exact filter cross-reference.
- Compare the filter’s thread size, gasket diameter, and overall dimensions to the one currently installed or to the OEM specification.
By following these steps, you can avoid ordering the wrong filter and ensure proper filtration and engine protection.
In brief
For a 2017 Honda Accord, the shortlist is engine-dependent: 2.4L uses part 15400-PLM-A01, and 3.5L uses 15400-RAA-003. If you’re buying aftermarket, stick to well-known brands and verify cross-references with your engine type and VIN. When in doubt, a quick call to a dealership parts counter or a VIN-based online lookup will confirm the exact fit.
Summary: The 2017 Accord’s oil filter varies by engine—2.4L uses 15400-PLM-A01, while 3.5L uses 15400-RAA-003. OEM parts provide a guaranteed match, while reputable aftermarket filters can be used with proper cross-referencing. Always verify with VIN to ensure accuracy.