The cabin air filter in a 2016 GMC Sierra is located behind the glove box on the passenger side of the dashboard. Access it by opening and lowering the glove box and removing the filter housing cover.
Location and how it’s accessed
The filter sits inside a small rectangular housing behind the glove box. You’ll typically reach it by dropping the glove box down and locating the housing at the far side of the dash on the passenger side. This setup is common across Sierra 1500 models around 2014–2018.
Access steps
To reach the filter, first prepare the space and then release the glove box to expose the filter housing. The following steps are designed to be simple and tool-free for most owners.
- Open the glove box and remove any contents.
- Gently press inward on the sides of the glove box to release the stops and allow the box to swing down.
- Locate the rectangular filter housing behind the glove box; it may have a small door or cover with clips.
- Release the cover or clips to access the cabin air filter.
Access isn’t complicated, and you should be able to reach the filter housing once the glove box is lowered.
Replacing the filter
Once you can see the filter, replace it with a new one, making sure the airflow arrows point in the direction of airflow through the HVAC unit.
- Slide the old filter out and note its orientation.
- Insert the new filter in the same orientation, aligning it with the housing.
- Reattach the housing cover, snap it into place, and raise the glove box until it clicks shut.
When reassembled, you’re ready to test the system by turning on the HVAC to confirm airflow and to ensure the filter is seated properly.
What you’ll need
Generally, no tools are required for this job on the 2016 Sierra. A small flashlight can help you see inside the housing if the area is dim.
Summary
For a 2016 GMC Sierra, the cabin air filter lives behind the passenger-side glove box. Access it by lowering the glove box, locating the filter housing, removing the cover, and swapping in a new filter with the arrows facing the correct direction. Reassemble in reverse order and test the HVAC to confirm proper operation.
Where is your cabin filter located?
And that exposes the filter. There. So now we're just going to go ahead and pull that out. And you can see it is pretty darn filthy.
Where is the cabin filter on a 2018 GMC Sierra 1500?
Open the glove. Box remove the screws using a T15 Torx driver open the glove box remove the glove box assembly. Visit our website and order your new filter to remove the housing. Door pull on the two
Does a 2016 GMC Yukon Denali have a cabin air filter?
The cabin filter is located behind the glove box open the glove box remove the dampener cord from the glove box push in on the sides of the glove box to release the stops and lower the glove box
How to replace cabin air filter 2016 Grand Cherokee?
And clean out any debris. Inside. You will need to compress your new filter in order to install it insert your new filter with its airflow indicating arrow pointing towards the back of the car.