A typical wheel bearing replacement on a 2017 Honda Civic costs roughly $300 to $700 per wheel, depending on whether you’re replacing the front hub assembly or the rear bearing, your location, and the shop you choose. This range includes both parts and labor but can vary with suppliers and service options.
What drives the cost
Several factors influence the final price, including the part type, the wheel being serviced (front vs rear), regional labor rates, and whether additional services such as an alignment are performed after the replacement.
Parts cost breakdown
Here are typical price ranges you might encounter for wheel bearing components on a 2017 Civic, noting that exact prices depend on brand and supplier.
- Front wheel bearing hub assemblies (most Civics use hub assemblies for the front): roughly $120–$300 for aftermarket parts; OEM or premium aftermarket units commonly fall in the $250–$450 range per wheel.
- Rear wheel bearings (if replacement is needed on a given trim): roughly $100–$250 for aftermarket parts; OEM units typically $250–$350 per wheel.
In most Civics, the front hub assembly is the common replacement path, and the price reflects both the bearing and the integrated hub unit.
Labor and timing
Labor costs reflect the complexity and regional shop rates. Here are typical ranges for labor time and pricing.
- Front wheel bearing replacement: about 1.5–3.0 hours of labor, which translates to roughly $120–$450 depending on region and shop rate.
- Rear wheel bearing replacement: about 1.5–2.5 hours, with labor costs often in the same ballpark as front replacements or slightly less depending on access and vehicle configuration.
- Wheel alignment (often recommended after bearing/hub work): about $60–$120.
Some shops apply a minimum labor fee or adjust the price if brake components or CV joints are serviced during the job.
Regional and shop variations
Where you live and the type of shop you choose significantly affect total costs. The following ranges reflect typical scenarios in the United States as of the mid-2020s.
- Dealership or OEM-focused shops: higher end, often $500–$900 per wheel when including parts and labor.
- Independent or chain shops: commonly $350–$800 per wheel, depending on part choice and local labor rates.
- DIY or parts-store with installation: parts around $120–$450, plus labor charged by a trusted mechanic, depending on regional rates.
Always request a detailed written estimate that breaks out parts, labor, and any additional services such as alignment or brake work.
What to watch for and when to replace
Indicators of a failing wheel bearing include unusual noises (humming, rumbling, or growling from one corner), wheel vibration, looseness in the wheel, or ABS warning lights. If you notice these symptoms, have a qualified mechanic inspect the bearing assembly. Replacing the hub or bearing early can prevent further damage to rotors, brakes, or the axle.
Summary
The cost to replace a wheel bearing on a 2017 Honda Civic typically ranges from about $300 to $700 per wheel, with front-wheel assemblies generally costing more due to part prices. Regional labor rates and the choice between aftermarket versus OEM parts are major price drivers. Obtain a written estimate that itemizes parts, labor, and any related services to compare quotes accurately.