The 2013 Dodge Durango hides its 12‑volt battery in the engine compartment, on the passenger side, secured in a plastic tray with a clamp. It’s not in the trunk or under a rear seat. This article explains where to find it and how to access it safely.
Under-hood location and what to look for
Inside the engine bay, the battery sits toward the passenger side near the front of the compartment. It is placed in a black plastic tray and held down by a clamp. The positive terminal is typically covered with a red protective cap, while the negative terminal sits on the opposite side of the battery.
While the exact appearance may vary slightly by engine type, the standard layouts for the 2013 Durango with a 3.6L Pentastar or a 5.7L Hemi place the battery in this area.
To verify and prepare for maintenance or jump-starts, use the steps below.
- Park on level ground, set the parking brake, and open the hood.
- Look toward the passenger side of the engine bay for a battery in a plastic tray near the shock tower and radiator support.
- Note the terminal colors: a red cap typically covers the positive terminal, and the negative terminal is on the opposite side.
- Consult the owner’s manual if you’re unsure about the exact location for your specific engine configuration.
In short, the battery is located in the engine bay on the passenger side, mounted in a tray near the front of the compartment. This placement is standard across common Durango configurations and is the location to access for charging, replacement, or jump-starts.
Alternate notes
Some trims or optional equipment could alter how components appear under the hood, but the Durango’s 12‑volt battery generally remains on the passenger side of the engine bay. If you cannot locate it, refer to the owner's manual or service manual for the precise layout by VIN, or seek assistance from a mechanic.
Summary
The 2013 Dodge Durango places its battery in the engine compartment on the passenger side, secured in a plastic tray near the front of the bay with a red-covered positive terminal. This location is standard for common engine configurations and is the place to access for maintenance, charging, or jump-starts.