The 2014 Camry uses two oil grades depending on the engine: 0W-20 for the 2.5-liter four-cylinder and 5W-30 for the 3.5-liter V6.
Oil is added to the engine's crankcase, not the intake, so this article focuses on the correct engine oil grades and capacities for each engine. The four-cylinder holds about 4.4–4.5 quarts with a filter, while the V6 holds about 6.0–6.4 quarts with a filter. Use synthetic oil that meets API SN and ILSAC GF-5 standards, as recommended by Toyota in the owner's manual.
Engine-specific oil recommendations
Below are the oil grades and approximate capacities by engine configuration found in the 2014 Camry. Verify your exact figure in the owner's manual or Service Information if you are unsure.
- 2.5L four-cylinder (2AR-FE): 0W-20 synthetic oil; approximate capacity 4.4–4.5 quarts with filter.
- 3.5L V6 (2GR-FE): 5W-30 synthetic oil; approximate capacity 6.0–6.4 quarts with filter.
In brief, the correct oil depends on which engine your Camry uses. Always confirm with the owner's manual and ensure the oil meets Toyota's specified standards.
Practical tips for oil choice
Key tips for selecting and using the right oil include:
- Always use the grade recommended for your engine (0W-20 for the 2.5L, 5W-30 for the 3.5L).
- Use oil that meets API SN and ILSAC GF-5 standards.
- Check the oil level with the dipstick and replace the filter when changing oil.
Following these tips helps ensure proper lubrication and performance for your Camry's engine.
Summary
For the 2014 Toyota Camry, oil type depends on the engine: 0W-20 synthetic for the 2.5L four-cylinder and 5W-30 synthetic for the 3.5L V6. Oil capacities are roughly 4.4–4.5 quarts for the four-cylinder and 6.0–6.4 quarts for the V6. Always use oil that meets API SN and ILSAC GF-5 standards and verify details in the owner's manual.