The 2010 Dodge Journey generally requires 5W-20 motor oil, but the exact grade can vary by engine and climate. Check the owner's manual or the oil filler cap for the definitive specification. Below is a breakdown by engine to help you confirm the right oil for your model.
Oil types by engine
Different engines offered in the 2010 Journey have different oil recommendations. Use the guidance below as a starting point, but always verify with the owner's manual or a trusted dealer, as regional specs may differ.
- 2.4L four-cylinder: Commonly recommended viscosity is 5W-20, with a typical capacity around 5 quarts (plus filter).
- 3.5L V6: Often listed as 5W-20 as the standard grade, though some climates or service notes may allow 5W-30; capacity is usually around 6 quarts (plus filter).
In both cases, use a motor oil meeting API service category appropriate for newer engines (SM/SN or higher) and ILSAC GF-4/GF-5 ratings. Synthetic-blend or full-synthetic oils are acceptable if they meet the spec.
Oil capacity and change schedule
Oil capacity figures determine how much oil you need to fill after an oil change and are important for accurate top-offs. The 2.4L engine typically takes about 5 quarts with filter changes, while the 3.5L V6 may require around 6 quarts plus filter. Regular oil changes are recommended every 6,000 to 7,500 miles depending on driving conditions and oil type; synthetic oils can extend change intervals per manufacturer guidance.
Where to find the exact specification
To avoid mistakes, consult the official Dodge Journey 2010 owner's manual or a dealership's service bulletin. The oil filler cap on the engine or the vehicle's door jamb sticker often lists the exact recommended viscosity and specification. If you are using a different climate or have special driving conditions, the manual may specify a different grade.
If you're performing maintenance yourself, you can use the owner's manual as the primary source; otherwise, a qualified mechanic can confirm the right grade and capacity for your vehicle's VIN and engine type.
Practical tips for changing the oil
Before you perform an oil change, gather the right tools and oil, and dispose of used oil properly. Always replace the oil filter, wipe the gasket, and ensure the drain plug is torqued to the manufacturer's specification. If you are unsure, refer to the manual or seek professional service.
In summary, the Dodge Journey 2010 has two engine options with the same recommended grade in most cases (5W-20), but you should verify the exact grade and capacity using the owner's manual or a dealership to ensure compatibility and best performance.
Summary: For a 2010 Dodge Journey, plan to use 5W-20 motor oil (for both the 2.4L I4 and 3.5L V6 in most markets), but always verify with the owner's manual and consider climate and driving conditions. Use API SN/ILSAC GF-5 rated oil, synthetic or synthetic-blend as appropriate, and follow the recommended change intervals.