For a 2022 Hyundai Santa Fe, the OEM cabin air filter part number most commonly used is 97168-2F000. This number is listed in Hyundai's official parts catalogs and is widely used by dealerships for the 2022 Santa Fe cabin air filter replacement. If your vehicle is subject to a regional variation or a carbon-activated version, consult the dealer for the precise code.
The cabin air filter is essential for removing dust, pollen, and other contaminants from outside air before it flows into the cabin. Ensuring you have the correct part helps maintain filtration performance and proper fit. In some markets, trims or regional specifications may use a variant of the same filter with a different part number, so it's best to verify with a dealer or by inspecting the filter housing label.
How to verify the correct part number
To confirm the exact number for your vehicle, consider these steps:
- Check the air filter housing or the filter itself for a printed part number on a label or stamp.
- Consult your owner's manual or the Hyundai service information specific to the 2022 Santa Fe.
- Use Hyundai’s official Parts Lookup by VIN or contact a Hyundai dealer’s parts department for confirmation.
- If you’ve previously replaced the filter, compare the old filter’s part number to the catalog listing.
Following these steps will typically confirm that 97168-2F000 is the correct OEM cabin air filter for the 2022 Santa Fe; however, regional variations can occur and should be verified with a dealer.
Choosing between standard and carbon-activated filters
Some Santa Fe models equipped for higher efficiency filtration or specific markets may use carbon-activated cabin air filters, which can have a different catalog number while still fitting the same housing. This section explains what to know before buying.
- Activated carbon filters provide enhanced odor and some gas filtration, but still fit the same housing as standard filters.
- The part number may differ for carbon-activated variants; confirm the exact code with Hyundai Parts or the retailer by using your VIN or the vehicle’s trim level.
In most cases, if you are replacing a standard cabin air filter on a 2022 Santa Fe, you should look for 97168-2F000, but confirm whether your vehicle uses a carbon-activated variant to avoid ordering the wrong part.
Do-it-yourself replacement guide
If you’re planning to replace the cabin air filter yourself, here are basic steps you can follow. Always consult your owner’s manual for model-specific instructions.
- Park the vehicle and turn off the ignition, then locate the glove box area where the filter lives behind the lower dash panel.
- Remove the glove box damper or sides to allow the glove box to drop down, providing access to the filter housing.
- Unclip the filter housing cover, then slide the old filter out, noting the orientation of the airflow arrows.
- Insert the new filter with the arrows pointing toward the rear of the vehicle or as indicated on the filter housing, reseal the housing, and reattach the cover.
- Return the glove box to its original position and test the HVAC system to ensure proper airflow.
Replacing the cabin air filter annually or during routine maintenance is recommended to maintain cabin air quality and HVAC performance.
Summary
For the 2022 Hyundai Santa Fe, the official OEM cabin air filter part number is typically 97168-2F000. Verify with your dealer or by checking the filter or housing label, as regional or trim-specific variations may apply. When replacing, consider whether a standard or carbon-activated filter is required, and follow the replacement steps to ensure proper fit and airflow.