It uses 0W-20 full synthetic engine oil.
For the 2020 Tacoma's 3.5-liter V6 (2GR-FKS), that viscosity is chosen to balance cold-start protection, fuel efficiency, and emissions. The oil capacity with the filter change is about 6.0 quarts (5.7 liters). Use an API SN-rated, ILSAC GF-5 compliant oil, preferably Toyota Genuine Oil or a reputable equivalent. Always verify the exact specification in your owner’s manual for your trim and region.
Oil grade and capacity
The following details summarize the official oil type, capacity, and service interval for the 2020 Tacoma V6:
- Viscosity: 0W-20 full synthetic engine oil.
- Oil specification: API SN-rated, ILSAC GF-5 compliant; Toyota Genuine Synthetic Oil or an equivalent is recommended.
- Capacity: Approximately 6.0 quarts (5.7 liters) of oil, including the filter.
- Change interval: 10,000 miles (16,000 km) or 12 months under normal driving; shorter intervals under severe conditions (extreme temperatures, towing, frequent short trips, dusty environments).
Note: Always consult the owner’s manual or a Toyota dealer for your specific vehicle configuration and regional recommendations.
Maintenance and regional considerations
In normal driving conditions, Toyota typically schedules oil and filter changes every 10,000 miles (16,000 km) or 12 months when using 0W-20 full synthetic oil. In severe conditions—such as towing, frequent short trips, extreme hot or cold temperatures, or dusty environments—shorter intervals may apply. Regional variations and model year updates can also affect the exact specification, so verify with your manual or dealer.
Summary
In short, the 2020 Toyota Tacoma V6 requires 0W-20 full synthetic engine oil, with a capacity of about 6.0 quarts (5.7 liters) including the filter, and a maintenance interval typically around every 10,000 miles or 12 months under normal driving. Always confirm current guidance in the owner’s manual or with a Toyota professional, especially if you drive in extreme conditions or in a region with different specifications.