Most owners can expect to pay between $500 and $1,200 to replace a radiator on a 2016 Jeep, including parts and labor. The exact figure depends on the model (Cherokee, Grand Cherokee, Wrangler, Renegade), the radiator type (aftermarket vs OEM), and whether the cooling system requires additional work.
What affects the price
The total cost is driven by the radiator type, labor rates, and any extra components that must be replaced during the repair.
- Radiator type and supplier: aftermarket radiators are typically cheaper than OEM; radiators with built-in transmission cooler or higher-capacity options cost more.
- Labor rate and time: independent repair shops often charge about $85–$120 per hour; dealerships can be $110–$180 per hour. Replacement generally takes 2–4 hours depending on the model.
- Accessibility and complexity: Wranglers and Grand Cherokees with dual fans or difficult engine bays may require additional labor for access and secure mounting.
Understanding these options helps you budget for the radiator itself and the labor to install it, which together determine the total price.
Parts cost
Costs for radiator parts vary by whether you choose aftermarket or OEM replacements, and whether the radiator includes extra cooling features.
- Aftermarket radiator: typically $150–$400
- OEM replacement radiator: typically $350–$700
- Radiator with integrated transmission cooler or higher-capacity option: $400–$900
Conclusion: The radiator part you pick will largely drive upfront costs, while labor remains a consistent expense across options.
Labor costs
Labor time and regional rates play a major role in the final bill. Here are typical expectations.
- Independent shop labor rate: roughly $85–$120 per hour; replacement commonly 2–4 hours
- Dealership labor rate: roughly $110–$180 per hour; replacement often 2–4 hours, sometimes longer for complex setups
- Estimated total labor cost: about $170–$480 at an independent shop; $220–$720 at a dealership
Conclusion: Labor charges are a major portion of the total, with price variability largely tied to the shop type and local rates.
Additional costs and considerations
Several supplementary items can add to the bill, even if you only need a radiator.
- Coolant flush and replacement: $50–$120
- New hoses, clamps, and related hardware: $20–$100
- Thermostat, temperature sensor, or radiator cap if needed: $20–$200
- Coolant disposal and shop supplies: $10–$40
Conclusion: Budget for fluids and minor parts that are commonly replaced during radiator work to avoid surprise charges.
Model-specific cost ranges for 2016 Jeep models
2016 Jeep Cherokee
Estimated total: about $600–$1,000. Lower end typically involves aftermarket parts and shorter labor; higher end reflects OEM parts and dealer installation or more complex cooling setups.
2016 Jeep Grand Cherokee
Estimated total: roughly $800–$1,500. Grand Cherokees often require more labor time due to engine bay access and may use higher-cost radiators.
2016 Jeep Wrangler
Estimated total: around $600–$1,100. Costs vary with fan configuration and whether additional cooling components are replaced.
2016 Jeep Renegade
Estimated total: typically $600–$1,000. The price range reflects differences in engine options and whether the radiator includes an integrated cooling feature.
Summary
Replacing a radiator on a 2016 Jeep generally falls in the $500–$1,200 range, though certain models and configurations can push higher. The biggest factors are the radiator type (aftermarket vs OEM), labor rates, and whether extra cooling components or fluids are required. For the most accurate quote, obtain itemized estimates from multiple local shops and confirm whether the price includes coolant, disposal, and any required ancillary parts.