The 2020 Honda HR-V uses 0W-20 full-synthetic motor oil, preferably Honda Genuine oil or an equivalent that meets API SN or newer, with an oil capacity of about 3.4 quarts (3.2 liters) when changing the filter. Always check the owner's manual for the exact specification and capacity for your specific model and region.
Oil type and specifications
Honda’s 1.8-liter i-VTEC engine in the HR-V is designed to run on a 0W-20 viscosity. Using a synthetic 0W-20 provides optimal cold-start performance, fuel efficiency, and engine protection. When selecting oil, ensure it is API SN or newer and, if possible, also labeled as compatible with ILSAC GF-6 or API SP, which are common standards for modern Honda engines.
Choosing the right oil category
For most HR-V owners, a 0W-20 full-synthetic oil that carries the API SN or newer rating is appropriate. Many brands also indicate GF-6 compatibility. Using a thicker oil or an oil not rated for these standards can impact engine performance and warranty considerations.
Capacity and maintenance intervals
The engine oil capacity with a new filter is roughly 3.4 quarts (3.2 liters). For synthetic 0W-20, Honda typically recommends following the maintenance minder, with oil-change intervals around 7,500 miles (12,000 kilometers) or one year, whichever comes first; shorter intervals may apply in severe driving conditions.
Regional notes
Oil specifications are largely consistent worldwide, but regional guidelines can vary. Always verify the exact oil grade and interval for your market by consulting the owner's manual or checking with a local Honda service center.
Summary
The 2020 Honda HR-V takes 0W-20 full-synthetic motor oil (Honda Genuine or API SN or newer) and uses about 3.4 quarts with a filter. Confirm exact specifications in your manual or with a dealer to ensure you meet regional requirements.