Engine-specific oil is required for the 2020 Dodge Charger. The vehicle does not use a single oil grade; the recommended viscosity depends on the engine under the hood. In general, synthetic oil is used across the lineup, with different grades tied to each engine option.
Oil type by engine
Below are the typical oil grades associated with each engine option offered in the 2020 Charger. Always verify the exact specification in the owner’s manual or on the oil fill cap for your specific vehicle.
3.6L Pentastar V6
The 3.6L V6 commonly uses 0W-20 synthetic oil to optimize efficiency and emissions.
- Recommended oil: 0W-20 synthetic
- Standards: API SN+ (or newer), ILSAC GF-5 (or newer); Mopar MS-6395 certification is often referenced by Chrysler vehicles
- Notes: Refer to the owner’s manual for any model-year nuances and fill amounts
Using the specified 0W-20 helps maintain fuel economy and proper engine lubrication for the base engine.
5.7L Hemi V8
The 5.7L Hemi typically calls for 5W-20 synthetic oil, a viscosity common to many Hemi V8s in the Charger lineup.
- Recommended oil: 5W-20 synthetic
- Standards: API SN+ (or newer), ILSAC GF-5 (or newer); Mopar MS-6395 certification is commonly listed
- Notes: Always confirm with the manual for any trim-specific guidance
Using the correct 5W-20 grade helps protect the larger V8 under typical driving conditions.
6.4L Hemi V8 (392)
The 6.4L variant (SRT/Scat Pack) is generally specified for 0W-40 synthetic oil.
- Recommended oil: 0W-40 synthetic
- Standards: API SN+ (or newer), ILSAC GF-5 (or newer)
- Notes: Some configurations may tolerate 5W-40; always verify the exact grade in the manual
Higher-performance applications of the 6.4L benefit from the higher-temperature protection of 0W-40.
6.2L Supercharged Hemi (Hellcat)
The Hellcat’s high-output engine generally requires 5W-40 synthetic oil.
- Recommended oil: 5W-40 synthetic
- Standards: API SN+ (or newer), ILSAC GF-5 (or newer)
- Notes: Some markets or dealer guidance may specify variants; always check the manual
For track and high-performance use, 5W-40 helps maintain lubrication under extreme conditions.
Summary
In short, the 2020 Dodge Charger does not use a single oil grade. If your Charger has the 3.6L, use 0W-20 synthetic; for the 5.7L, 5W-20 synthetic; for the 6.4L, 0W-40 synthetic; and for the 6.2L Hellcat, 5W-40 synthetic. Always confirm with the owner’s manual or the oil-fill cap, and choose oil that meets the factory specifications. Regular oil changes with the correct grade protect engine longevity and performance.