The 2016 Honda CR-V uses 0W-20 synthetic engine oil, with a capacity of about 4.7 quarts (4.4–4.8 quarts depending on filter) per fill. It should meet API SN or newer standards, and Honda Genuine 0W-20 is recommended.
The 2016 CR-V is equipped with a 2.4-liter four-cylinder engine. Getting the right oil type and capacity is essential for optimal performance, fuel efficiency, and engine longevity. Below is a concise guide to the official oil specification for this model, followed by practical tips for maintenance and shopping.
Oil specifications for the 2016 CR-V
Before listing the key specifications, note the primary requirements you should follow when purchasing oil for this vehicle.
- Oil viscosity: 0W-20 (synthetic) is the recommended grade for the 2.4-liter engine in the 2016 CR-V.
- Oil capacity: Approximately 4.7 quarts (with filter) per fill.
- Oil specification: API SN or newer, ILSAC GF-5 or newer; use oil that meets these standards.
- Oil type: Synthetic 0W-20 is preferred; Honda Genuine 0W-20 or equivalent is commonly recommended.
- Maintenance interval: Follow the owner’s manual for oil-change intervals, which are typically based on mileage and driving conditions.
Sticking to these specifications helps ensure proper lubrication and engine protection under normal driving conditions.
Additional maintenance notes
Always verify the exact specification in your vehicle’s owner’s manual or on the under-hood oil-cap sticker, as regional recommendations can vary. When in doubt, consult a Honda dealership or trusted mechanic to confirm the correct oil type and capacity for your specific CR-V model and climate.
Summary
For the 2016 Honda CR-V, use 0W-20 synthetic engine oil, about 4.7 quarts with filter, meeting API SN or newer standards. Follow the owner’s manual for confirmation of viscosity and change intervals, and opt for Honda Genuine oil when possible to maintain engine performance and warranty coverage.