The 2019 Jeep Cherokee Latitude uses a 12-volt lead-acid car battery. Replacement batteries are typically Group 86R (or 86) sized, with roughly 600–750 cold-cranking amps, though models with a stop-start system may require an AGM battery. Always verify the exact spec on your vehicle’s label or by VIN to be sure.
Battery type and group size
To help you choose the right battery, here are the typical specs you’ll encounter for this model:
- Voltage and type: 12-volt lead-acid battery (most are maintenance-free flooded lead-acid; AGM is used if the car has Start-Stop/high-demand systems).
- Group size: commonly Group 86R (some sources list Group 86) as a replacement size.
- Cold-cranking amps (CCA): typically around 600–750 CCA depending on engine and equipment.
- Special considerations: If your Cherokee has an optional stop-start system, your replacement may need an AGM battery to handle deeper cycling.
In short, you’ll typically be looking for a 12V group size 86/86R battery, with adequate CCA and, if applicable, AGM construction for stop-start models. Always verify with your battery label or dealer for the exact spec.
How to confirm the exact specification for your vehicle
Since battery specs can vary by trim, engine, and options, use these checks to confirm the correct battery for your particular Cherokee Latitude:
- Inspect the label on the current battery to read the group size (e.g., 86R), voltage, and CCA rating.
- Consult the owner's manual or the official Jeep battery replacement chart by VIN.
- Ask a Jeep dealer or a trusted auto parts retailer, providing your VIN for precise guidance.
- If replacing yourself, compare the dimensions and terminal layout to ensure a proper fit in the battery tray.
Verifying the exact spec helps ensure you select a compatible battery that fits correctly and meets the performance needs of your vehicle.
What to consider when buying a replacement
When shopping for a replacement, consider these points to avoid missteps:
Battery type (flooded vs AGM), group size, CCA, reserve capacity, warranty, and compatibility with any stop-start/mild-hybrid features. If your vehicle is not equipped with start-stop, a standard flooded lead-acid battery with the correct group size is typically sufficient; otherwise, an AGM variant is often recommended.
Summary: The 2019 Jeep Cherokee Latitude generally uses a 12-volt lead-acid battery, commonly Group 86R (or 86) with around 600–750 CCA; AGM is recommended if stop-start is present. Confirm your exact spec via the battery label, manual, or dealer with your VIN to ensure a correct replacement.
What type of battery does a 2019 Jeep Cherokee use?
The 2019 Jeep Cherokee can use several battery types depending on original equipment: traditional flooded lead-acid or higher-performance designs that offer extended reserve capacity and stronger cold-cranking amps.
What battery goes in a Jeep Cherokee?
The appropriate battery type varies by model, but you can check your current automotive battery if you are unsure. Standard BCI Group Sizes for Jeep Cherokees are 34, 48 and 94R. It's important to choose the right BCI Group size for your model so your battery meets the vehicle's electrical demands.
How much does a new battery cost for a 2019 Jeep Cherokee?
between $922 and $956
The average cost for a 2019 Jeep Cherokee Battery Replacement is between $922 and $956. Labor costs are estimated between $73 and $107 while parts are typically priced around $849. This range does not include taxes and fees, and does not factor in your unique location.
Does the 2019 Jeep Cherokee Latitude have two batteries?
So the 2019 Jeep Grand Cherokee. Like most modern cars. Today have two batteries one main big battery.