The CR-V’s rear wiper blade is typically 12 inches long, though exact size can vary by model year and regional specifications. Verify your specific vehicle before purchasing a replacement.
How to verify the correct size for your CR-V
Because the size can differ across generations, the quickest way to be sure is to check the owner's manual, inspect the blade for markings, or measure the current blade yourself.
Reading blade markings
Many OEM blades have size information printed along the blade or near the mounting point. If you see 12 in or 300 mm, that’s your size. If there’s no marking, proceed to measure the blade yourself.
Common rear wiper sizes you may encounter on CR-V models
In practice, the majority of CR-V rear wiper blades are 12 inches long, but older models or regional variants can use blades that are slightly shorter or longer. Here are the sizes you might encounter:
- 12 inches (300 mm) — the standard size for most current and recent CR-V generations (roughly 2012 onward).
- 11 inches (280 mm) — occasionally seen on older CR-V models or specific regional versions.
- 13 inches (330 mm) — rare; generally not required for typical CR-V setups but possible in some markets or aftermarket configurations.
Always confirm with your vehicle's documents or by measuring the blade to ensure a proper fit.
How to measure and replace a CR-V rear wiper blade
If you need to measure or replace the blade, follow these steps to avoid buying the wrong size.
- Park the car on a flat surface and turn off the ignition. Lift the rear wiper arm away from the glass until it rests at an accessible angle.
- Measure the blade length from tip to tip of the rubber edge (not including the mounting frame). Use a ruler or tape measure in inches or millimeters.
- Compare your measurement with the typical sizes listed above or consult the OEM part number from your owner's manual or dealer catalog to confirm the exact length.
Once you have the correct size, you can replace the blade by releasing the retaining clip or tab on the wiper blade, slide the blade out of the arm, and attach the new blade per the manufacturer’s instructions.
Test the replacement: After installation, run the rear wiper to ensure full coverage and proper contact with the glass.
Where to buy a CR-V rear wiper blade
You can purchase rear wiper blades at Honda dealerships, auto parts chains, or online retailers. If you know your CR-V’s year, model, and the blade length, you’ll be able to find the right replacement quickly.
- OEM replacement: ensures exact fit and performance.
- Aftermarket blades: usually more affordable, with many options available in 11–13 inch sizes.
- Universal adapters: if you have a slightly nonstandard size, some adapters allow use of different blade types.
In all cases, verify compatibility with your exact CR-V year and trim before purchasing.
Summary
The CR-V rear wiper blade is typically 12 inches long, though sizes can vary by year and market. Always confirm by checking the owner's manual, examining the current blade for markings, or measuring directly. With the correct size, replacement installation is straightforward and will restore rear window visibility.